Template:Alarm Out WebUI New

Revision as of 17:51, 6 February 2020 by William.V (talk | contribs)

Prerequisites

Video Instructions

Step by Step Instructions

1. Login to the WEBUI

Alarm OutNWUI-1.png

2. Go to Alarm

Alarm OutNWUI-1.png

3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to

Alarm OutNWUI-1.png

4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.

Alarm OutNWUI-1.png

5. Check the General Alarm box and select the relay to enable. Click on OK

Alarm OutNWUI-1.png

6. Click on OK to save and finalize the settings

Alarm OutNWUI-1.png