FAQ/Change HDCVI Camera Resolution Output via OSD

Revision as of 17:00, 25 February 2020 by JP (talk | contribs)

Change HDCVI Camera Resolution Output via OSD

Description

Prerequisites

  • Dahua XVR or DVR
  • HDCVI Dahua Camera

NOTE: Output resolution of HDCVI camera must be equal to or less than recorder capabilities to access OSD.

Instructions

Icon for type WebUI Old.pngWebUI Old

Description

These instructions were written with a C52A2N

Channel 1: 4K (8 MP) at 15 fps or 4 MP at 15 fps

Other Channels: 4 MP at 15 fps or 1080p, 720p, 960H, D1, HD1, BCIF, CIF, QCIF at 30 fps

Prerequisites

  • Dahua recorder
  • PTZ settings of recorder set to:

PTZ settings.png

Video Instructions

Step by Step Instructions

Change HDCVI Camera Resolution

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

Change HDCVI Camera via OSD - WebUI Old - 1.jpg

2. Use the device tree on the left to select the camera you wish to configure

Click the camera icon next to the camera/channel and it will load in the main window

Change HDCVI Camera via OSD - WebUI Old - 2.jpg

3. Click PTZ Menu

Change HDCVI Camera via OSD - WebUI Old - 3.jpg

4. Click On

Change HDCVI Camera via OSD - WebUI Old - 4.jpg

5. The camera's OSD menu will appear

Change HDCVI Camera via OSD - WebUI Old - 5.jpg

6. Use the on screen controls to navigate the menu

Change HDCVI Camera via OSD - WebUI Old - 6.jpg

7. Under Video Mode

Use the controls to adjust the setting to the desired video mode/resolution

Change HDCVI Camera via OSD - WebUI Old - 7.jpg

Change HDCVI Camera via OSD - WebUI Old - 8.jpg

8. Click the center button to confirm the settings change

Change HDCVI Camera via OSD - WebUI Old - 9.jpg

9. A prompt will appear to confirm

Click the center button to confirm

Change HDCVI Camera via OSD - WebUI Old - 10.jpg

10. The camera will briefly reboot and then come back in the desired Video Mode

Change HDCVI Camera via OSD - WebUI Old - 11.jpg

11. Navigate to Exit in the menu to exit the camera's OSD menu

Change HDCVI Camera via OSD - WebUI Old - 12.jpg


Connect to Other Channel

Change HDCVI Camera via OSD WebUI Old Last Step.png