Template:Temperature Monitoring Camera Setup
Revision as of 21:44, 2 April 2020 by Marques.Phillips (talk | contribs)
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser (default 192.168.1.108)
At the Web Login
Enter the Username and Password
Click Login
2. Select Setting
Error creating thumbnail: Unable to save thumbnail to destination
3. Select Smart Thermal
Error creating thumbnail: Unable to save thumbnail to destination
4. Select Smart Plan
Error creating thumbnail: Unable to save thumbnail to destination
5. Select the Temperature icon then click Save
Error creating thumbnail: Unable to save thumbnail to destination
6. Select Human Temperature
Error creating thumbnail: Unable to save thumbnail to destination
7. Select Blackbody parameter
Error creating thumbnail: Unable to save thumbnail to destination
8. Select the Draw Rule button
Error creating thumbnail: Unable to save thumbnail to destination
9. Draw a box inside the highlighted blackbody box
Error creating thumbnail: Unable to save thumbnail to destination
10. Check the box to Enable
Click Save
Error creating thumbnail: Unable to save thumbnail to destination
11. Select Human Temperature Measurement
Error creating thumbnail: Unable to save thumbnail to destination
12. Check the box to Enable
Error creating thumbnail: Unable to save thumbnail to destination
13. Click Draw Rule
Then draw the desired rule
Error creating thumbnail: Unable to save thumbnail to destination
14. Click Save
Error creating thumbnail: Unable to save thumbnail to destination
15. Select Temperature
Error creating thumbnail: Unable to save thumbnail to destination
16. Select Global Setup
Error creating thumbnail: Unable to save thumbnail to destination
17. Select Temperature Switch
Use the dropdown box to change the unit to F (Fahrenheit)
Error creating thumbnail: Unable to save thumbnail to destination
18. Click Save
Error creating thumbnail: Unable to save thumbnail to destination
