Thermal/Temperature Monitoring/Initial NVR Setup

Revision as of 23:03, 5 May 2020 by Marques.Phillips (talk | contribs) (→‎Description)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Temperature Monitoring Solution Initial NVR Setup

Description

This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update , factory defaulting, and setting Network information

Prerequisites

  • DHI-NVR5216-16P-I powered and connected to network
  • Latest firmware for NVR (see below)

Temperature Monitoring Solution Firmware

NVR Model Firmware
DHI-NVR5216-16P-I

Video Instructions

Step by Step Instructions

Device Initialization

  • Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer

  • Select the Region, Language and Video Standard. Click Next

  • Scroll down to review the agreement and check to confirm.

  • Click Next

  • Select the Time Zone and confirm the System Time. Click Next

  • Create a password for the device and enter twice to confirm. Click Next

  • Select which Password Protection feature(s) you wish to enable. Click OK

  • A prompt will confirm a successful initialization

Confirm/Upgrade NVR Firmware

  • Enter the password and click Login

  • Click Operation

  • Click Information > Version. System Version will show the current firmware version of the NVR.

  • Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.

  • Click System Maintain

  • Click the Upgrade tab. Click Browse

  • Select the firmware file that was downloaded. Click Open

  • Click Upgrade

  • A prompt will appear to confirm the unit is upgrading

  • A prompt will appear to confirm the unit is rebooting after upgrading

Factory Default

Resetting the device to Factory Default is recommended after upgrading the Firmware.

  • Enter the password and click Login

  • Click Operation

  • Click Information > Version. System Version will show the current firmware version of the NVR.

  • Compare the Build Date to the firmware file downloaded. If the Build Date matches that date the system is up to date.

  • Click System Maintain

  • Click the Upgrade tab. Click Browse

Edit Network (TCP/IP) Information

Change the recorder from the default IP - 192.168.1.108 - and edit Full Network information for the NVR

  • Click Management > Network

  • Click TCP/IP. Click the Pencil icon under Edit

  • Select Static or DHCP for Network mode

  • Click Next

  • Enter Network information. Click OK

  • Click OK

  • A prompt will confirm the IP Address change

Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/Temperature_Monitoring/Initial_NVR_Setup&oldid=62653"