Template:Thermal/Temperature Monitoring/3rd Party VMS/Milestone/Setup Camera

Revision as of 17:38, 15 May 2020 by Marques.Phillips (talk | contribs) (Created page with " =Setup and Configure Camera= ==Description== This guide will show how to initialize and configure the Dahua Thermal camera in preparation for use with Milestone ==Prerequisi...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Setup and Configure Camera

Description

This guide will show how to initialize and configure the Dahua Thermal camera in preparation for use with Milestone

Prerequisites

  • Dahua Thermal camera powered on and connected to network

Step by Step Instructions

Initialize Camera

Please reference this guide for initial setup of the Thermal camera:

Stand Alone Thermal Camera Initial Setup

Configure Camera

1. Log into the Web interface of the camera

Click Setting


2. Click Smart Thermal > Smart Plan

Click to enable the Thermal Temperature Monitoring and click Save

Thermal Temperature Monitoring - Milestone - Camera Configuration - 1.jpg

3. Click Thermal Temperature > Thermal Temperature Monitoring

  • Check the box to enable
  • Check the box to enable High Temperature Warning

Note: If you select 'Temperature report' , we will get all alarm notifications when camera detects any body temperature, no matter if it's higher or lower

  • Check Snapshot
  • Click Save

Thermal Temperature Monitoring - Milestone - Camera Configuration - 2.jpg

4. Click Smart Thermal > Smart Channel

Click to enable Crop Images

Click Save

Thermal Temperature Monitoring - Milestone - Camera Configuration - 3.jpg