Thermal/Calibrate Blackbody
Revision as of 18:59, 8 June 2020 by Nicky Gunakan (talk | contribs)
Contents
How to Configure the Blackbody
Description
This article will go over how to configure the Blackbody.
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- JQ-D70Z Blackbody
Video Instructions
Step by Step Instructions
1. Login to the Thermal Camera
2. Go to Smart Thermal> Smart Plan> and enable Thermal Temperature Monitor. Save
3. On the left menu tab go to Thermal Temperature>Blackbody Parameter and enable.
- Leave the black box permanently at 35°C (95°F)
- Draw the area around the inner plate of the Blackbody box for accurate readings
Make sure the Blackbody box is set to 35°C (95°F) to reflect the settings in the camera
