Video Intercom/SIP 2.0/Stand Alone Multiple VTH and VTO Setup
UNDER CONSTRUCTION
Please watch the Video Instructions until the Step by Step Instructions are completed, Thank you for your patience
Icon | Name | Generation | Technology | SIP 2.0 | Example Device 1 | Example Device 2 | Identifying Characteristic | PC Software | Mobile App |
---|---|---|---|---|---|---|---|---|---|
Gen2-SIP2.0-IP | Gen 2 | IP | SIP 2.0 | VTH1550CH-S | DHI-VTO2000A-S | "-S" at end of model name | DSS or DSS Express S | DSS Mobile for VDP |
Contents
Stand Alone Multiple VTH and VTO Setup
Description
This guide will show how to setup multiple stand alone VTO and VTH devices on a network
In this example a VTO will be designated as the main VTO and also act as the SIP server for the installation
In this example a VTO2000A will act as Main VTO and a VTO2111D will act as Sub VTO
Prerequisites
- VTO and VTH initialized and set up on network
- VTO and VTH log in information
Devices
NOTE: These are the device settings we used for this article