Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Video Intercom/SIP 2.0/How To Add VTO4202 To DSSPro Via Configtool
Contents
How To Add VTO4202 To DSSPro Via Configtool
Description
This article will go over DHI-VTO4202F setup to DSS Pro using Configtool
DSS Pro will be acting as the SIP server
Pre-requisites
- Initialized VDP Devices. Follow our guide here before continuing
- DSS Pro
- Configtool
Video Instructions
Step by Step Instructions
1. After all devices are initialized go to Building Config
2. Go to Global Parameter
3. Global Parameters
Global Parameters | |
---|---|
Center Number = 888888 | Sever Type = Express/Dss |
Server Address = Enter DSS Pro IP Address | Server Port = 5080 |
Server Username - Enter the Username used on DSS Pro | Server Password - Enter the Password for the DSS Pro User |
Sip Domain = VDP | Registered PWD = Leave Default |
VTO Username = Enter VTO Username | VTO Password = Enter VTO Password |
VTH Username = Enter VTH Username (admin by default) | VTH Password = Enter VTH Password |
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23
24.