Solution Delivery/Integrating Video Intercom with Acccess Control

Revision as of 20:35, 7 October 2021 by William.V (talk | contribs)

Description

This article will show how to wire the Normally Opened relay on the Video Intercom to the PUSH connection on our Access Control. This will act as a Request to Exit button when the door on the Video intercom is triggered.

The Video Intercom relays can be triggered from a VTH or through DMSS.

Prerequisites

  • Access Controller
  • Dahua Video Intercom Setup

Step by Step Instructions

Physical Wiring

1.

2.

3.

How to open door via VTH

How to Open door via DMSS