Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Access Control/How to Initialize DHI ASC2204C-S with Configtool

Revision as of 23:32, 2 December 2021 by William.V (talk | contribs) (→‎Prerequisites)

Description

This article will go over the initialization of the DHI-ASC2204C-S

Due to security of the system you will need to connect a PC/laptop directly to the DHI-ASC2204C-S in order for this process to go smoothly

Prerequisites

  • Laptop/PC directly connected to the DHI-ASC2204C-S
  • Configtool

Step by Step Instructions

1. First make sure your laptop/PC is under the same subnet as the controller.

How to change IP Address to DHI-ASC2204C-S-1.png

Retrieved from "https://DahuaWiki.com/index.php?title=Access_Control/How_to_Initialize_DHI_ASC2204C-S_with_Configtool&oldid=75749"