EventIVS

Revision as of 22:44, 13 October 2015 by JP (talk | contribs) (Abandoned/Missing)

IVS Analyse

Tripwire Setup

IPCTripwire.jpg

Intrusion Setup

IPCIntrusion.jpg

Abandoned/Missing

IPCAbandoned.jpg

Intrusion

Parameter

Note

Tripwire

Can detect if there is any object crosses the set warning line in the video, trigger alarm according to the judgment

Intrusion

Can detect if there is any object intrudes the set forbidden zone, trigger alarm according to the judgment

Abandoned/Missing

Can detect if there is any object abandoned/missing in the set forbidden zone in the video, trigger alarm according to the judgment

Scene Change

Can be used to detect if there is any change to the video scene, trigger alarm according to the judgment.

Enable

Check to enable corresponding IVS function.

Action

Only supported by Intrusion. There are two options for action: cross, appear.

Direction

  • For “Tripwire”, it is to set the direction of warning line, you can select A->B, B->A, and A<->B.
  • For the “Cross” in the “Intrusion”, it is to set the direction of cross, you can select enter, leave and enter&leave.

Rule Type

Only supported by “Abandoned/Missing”, you can select object abandoned and missing.

Draw Rule

Check enable and click draw, and draw the rule with corresponding function in the monitoring image. Click clear to delete the rule which has been drawn.

Min Keep Time

For the “Enter the area” in the “Detect Action List”, set the min time between the target box appears in the area and trigger alarm.

Target Filter

Check enable, click “Draw”, and you can draw the size model of filter target for the rule in the scene; click “Clear” to delete all the target filter models which have been drawn.