Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

NVR/Basic Setup/Smart Add

Smart Add

Description

This allows you to add cameras into NVR using smart add.

Prerequisites

  • IP Cameras
  • NVR/DVR

Video Instructions

Step by Step Instructions

Accessing Smart Add

  • Method 1: From the startup wizard, click Smart add button.

NVRSmartAdd1.png

  • Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface.

NVRSmartAdd2.png

Smart Add Setup

NVRSmartAdd3.png

Click smart add button, you can see device enables DHCP function.

NVRSmartAdd4.png

System pops up the following interface for you to confirm IP information if there are several IP segments

NVRSmartAdd5.png

Now you can see system is auto adding IPC to the corresponding channels.

NVRSmartAdd6.png

You can see the following dialog box after system successfully added network cameras.

NVRSmartAdd7.png