Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Video Intercom/Products/DHI VTO2000A
Contents
DHI-VTO2000A
Features
- 1/3-in. 1.3 MP CMOS Imager
- Wide-angle Field of View
- Advanced System and Software for Residential Applications
- Night Vision and Voice Indication
- Supports Remote Unlock and Group Call Functions
- Video and Audio Messaging
- Stainless Steel Panel, Surface- or Flush-mounted
Firmware Update Instructions
- Instructions for Firmware Update via ConfigTool
- Instructions for Firmware Update via Internet Explorer
Firmware Update Download
Configuration Limitations
- 20 Villa VTO maximum
- 5 VTH maximum
- Push notifications only work if a VTH is added to this device
Password Reset
Important: Must be on version 2017-04-02 v3.100.0000.0.R
- Press the tamper button five times, you'll hear the tamper siren and a quick beep afterward indicating that the reset was successful
Specifications
System | |
Main Processor | Embedded Micro Processor |
Operating System | Embedded Linux |
Operation | |
Input | Single Mechanical Button |
Door Lock | Status Check Support (optional) |
Video | |
Video Compression | H.264 |
Image Sensor | 1/3-in. 1.3 MP CMOS Sensor |
Lens | 2.8 mm |
Angle of View | Horizontal: 90° |
Vertical: 120° | |
Day/Night | ICR |
Interface | |
Audio | Input: Omnidirectional Microphone |
Output: Built-in Speaker | |
Two-way Talk | |
Audio Compression | G.711 |
Door Control | Two (2) Channels: |
One (1) Relay Out for Main Lock | |
One (1) Channel Extended by Access Control Module | |
Alarm Input | Two (2) Channels: |
One (1) Channel, Unlock Button | |
One (1) Channel, Feedback | |
RS485 | One (1) Port |
Tamper Switch | One (1) |
Network | |
Ethernet | 10/100 Mbps, Self-adaptive |
Network Protocol | TCP/IP |
Certifications | |
Safety | EN 60950:2006+A2:2013 |
Electromagnetic Compatibility (EMC) | FCC CFR 47 Part 15 subpart B |
ANSI C63.4 - 2009 | |
EN 55022:2010, EN 55024:2010, EN 50130-4:2011, | |
EN 61000-6-3:2007, EN 61000-3-2:2006+A1:2009 | |
EN 61000-3-3:208, IEC 61000-4-2:2008, | |
IEC 61000-4-3:2010, IEC 61000-4-4:2012, | |
IEC 61000-4-5:2005, IEC 61000-4-6:2008, | |
IEC 61000-4-8:2009, IEC 61000-4-11:2004 | |
Electrical | |
Power | 12 VDC |
Power Consumption | Standby: ≤ 1 W |
Operation: ≤ 10 W | |
Environmental | |
Operating Temperature | -40° C to +60° C (-40° F to +140° F) |
Operating Humidity | 10% to 90%, Relative |
Ingress Protection | IP54 |
Vandal Resistance | IK07 |
Construction | |
Material | Stainless Steel |
Dimensions | 129.0 mm x 32.17 mm x 140.0 mm |
(5.08 in. x 1.27 in. x 5.51 in.) | |
Net Weight | 0.80 kg (1.76 lb) |
Installation | Surface- or Flush-mount |