:Bug Tracker

Revision as of 19:53, 16 October 2017 by Nathan (talk | contribs) (3.)

Bug Tracker

1. Push Notifications Not Working on Mobile App

Description

Push notifications do not work despite everything appearing to be setup properly

Affected Systems

  • DHI-NVR5208-8P-4KS2
  • DH-NVR5016-4KS2
  • NVR5032-4KS2
  • NVR5064-4KS2
  • NVR5208-4KS2
  • NVR5216-4KS2
  • NVR5216-8P-4KS2
  • NVR5224-24P-4KS2
  • NVR5232-4KS2
  • NVR5232-8P-4KS2
  • NVR5416-4KS2
  • NVR5424-24P-4KS2
  • NVR5464-4KS2
  • NVR5816-16P-4KS2
  • NVR5816-4KS2
  • NVR5832-16P-4KS2
  • NVR5832-4KS2
  • NVR5864-16P-4KS2
  • NVR5864-4KS2

Affected Firmware

  • DH_NVR5XXX-4K_Eng_V3.210.0003.0.R.20170418.zip

Solution

  • Set DNS1 to 8.8.8.8
  • Set DNS2 to 8.8.4.4

Working Firmware

N/A

2. Secondary HDMI Unable to Output 1080P

Description

HDMI 2 only able to output at 720P resolution. Previous firmware allowed for 1080P output.

Affected Systems

  • DHI-HCVR58A32S-S2
  • DHI-HCVR74A16L
  • DHI-HCVR78A16S

Affected Firmware

  • DH_HCVR7xxx(V2.0)_SpnEng_NP_V3.210.0001.0.R.20160322.zip

Solution

Pending

Working Firmware

  • DH_HCVR7xxx(V2.0)_SpnEng_NP_V3.210.0001.0.R.20151125.zip

3.

Description

NVD0405DH-4K - Webrec does not install!

Affected Systems

NVD0405DH-4K (Be on the lookout for other NVD models)

Affected Firmware

General_NVD0405DH-4K_Eng_P_V3.200.0001.50.R.20170307.zip

Solution

Upgrade the firmware via ConfigTool.

Working Firmware

General_NVD0405DH-4K_Eng_N_V3.200.0002.00.R.20170713

Quick setup instructions for support without training on the device: 1. Use internet explorer to log into the device using the IP address as the URL. 2. Download and install the plugin, for troubleshooting here’s a guide: http://www.dahuawiki.com/Troubleshoot/Internet_Explorer_ActiveX_Setup 3. Log into the device using admin / admin. There should be a prompt to change the password, please do so for your sake. 4. Once logged in select “+ Add Device” in the bottom right hand corner. 5. On the top left select “Remote Device” or the last item in the list. Do a device search for the axis camera, and “Add” or “Manual Add” it using its ONVIF credentials. Make sure the Connection Status is “Succeed”. 6. Select the TV Wall tab at the top right corner. 7. On the right side of the screen there is a device list with the camera you added. Use the drop down arrow next to the device name and select Channel_01 (or what is appears as) then select “Main Stream”. 8. Double click the IP address that corresponds with your camera to maximize the view. This should display video on all outputs marked with “1” unless you have selected another Screen. The screens correspond with the numbered output whether it’s BNC/VGA/HDMI.

Bug Name Template

Description

Affected Systems

Affected Firmware

Solution

Working Firmware