Difference between revisions of "Access Control/How To Setup Date Time ASC1204"

(Created page with "= How to setup or sync access controller date and time = ==Description== This article is to show you how to sync or setup the time on the access controller device. ==Pre-req...")
 
(Step by Step Instruction)
 
Line 14: Line 14:
 
1. Launch ACS Configtool.
 
1. Launch ACS Configtool.
  
[[File:ASC1204_Time_Sync_1.png|500px]]
+
[[File:ASC1204_Time_Sync_1.png|700px]]
 
   
 
   
 
2. Click on '''Search Settings''', and then enter the password of access controller. Click '''Ok'''.  
 
2. Click on '''Search Settings''', and then enter the password of access controller. Click '''Ok'''.  
  
[[File:ASC1204_Time_Sync_2.png|500px]]
+
[[File:ASC1204_Time_Sync_2.png|700px]]
  
[[File:ASC1204_Time_Sync_3.png|500px]]
+
[[File:ASC1204_Time_Sync_3.png|700px]]
  
 
3. Go to System Settings.
 
3. Go to System Settings.
  
[[File:ASC1204_Time_Sync_4.png|500px]]
+
[[File:ASC1204_Time_Sync_4.png|700px]]
  
 
4. Select the device by putting the checkmark on the device IP address.
 
4. Select the device by putting the checkmark on the device IP address.
  
[[File:ASC1204_Time_Sync_5.png|500px]]
+
[[File:ASC1204_Time_Sync_5.png|700px]]
  
 
5. Set the '''NTP''' to the correct time zone.  
 
5. Set the '''NTP''' to the correct time zone.  
  
[[File:ASC1204_Time_Sync_6.png|500px]]
+
[[File:ASC1204_Time_Sync_6.png|700px]]
  
 
6. Click '''Save'''.
 
6. Click '''Save'''.
  
[[File:ASC1204_Time_Sync_7.png|500px]]
+
[[File:ASC1204_Time_Sync_7.png|700px]]

Latest revision as of 02:05, 29 December 2020

How to setup or sync access controller date and time

Description

This article is to show you how to sync or setup the time on the access controller device.

Pre-requisites

1. ACS Config Tool.

Click Here To Download ASC Config Tool.

2. Computer that connected to the same network as Access Controller

Step by Step Instruction

1. Launch ACS Configtool.

ASC1204 Time Sync 1.png

2. Click on Search Settings, and then enter the password of access controller. Click Ok.

ASC1204 Time Sync 2.png

ASC1204 Time Sync 3.png

3. Go to System Settings.

ASC1204 Time Sync 4.png

4. Select the device by putting the checkmark on the device IP address.

ASC1204 Time Sync 5.png

5. Set the NTP to the correct time zone.

ASC1204 Time Sync 6.png

6. Click Save.

ASC1204 Time Sync 7.png