Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Access Control/How To Setup Date Time ASC1204

Revision as of 02:05, 29 December 2020 by Nicky Gunakan (talk | contribs) (Step by Step Instruction)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to setup or sync access controller date and time


This article is to show you how to sync or setup the time on the access controller device.


1. ACS Config Tool.

Click Here To Download ASC Config Tool.

2. Computer that connected to the same network as Access Controller

Step by Step Instruction

1. Launch ACS Configtool.

ASC1204 Time Sync 1.png

2. Click on Search Settings, and then enter the password of access controller. Click Ok.

ASC1204 Time Sync 2.png

ASC1204 Time Sync 3.png

3. Go to System Settings.

ASC1204 Time Sync 4.png

4. Select the device by putting the checkmark on the device IP address.

ASC1204 Time Sync 5.png

5. Set the NTP to the correct time zone.

ASC1204 Time Sync 6.png

6. Click Save.

ASC1204 Time Sync 7.png