DSS S2/User Portal/System Settings

Revision as of 19:21, 2 December 2022 by Andy (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How To Set System Settings In DSS User Portal

Description

This article will show you how to set system settings in the DSS Manager Portal

Prerequisites

  • DSS
  • Computer connected to the same local network / network segment as the server. The default IP address of the server is 192.168.1.108

Video Instructions

Coming Soon

Step by Step Instructions

1. Open a web browser and enter the IP address of the server. Enter the username/password and click Login

Login Manager Portal - 1.jpg

2. Click +

System Parameters - Manager DSS - 1.jpg

3. Click System

System Parameters - Manager DSS - 2.jpg

3. The system parameters will be displayed

System Parameters - Manager DSS - 3.jpg

The parameters are explained below:

Message Storage Time Setup

System Parameters - Manager DSS - 4.jpg

These parameters define the amount of time (in days) the server will keep the information type stored on the server.

  • Log
  • Alarm Info
  • GPS Info
  • POS (Point of Sale)
  • Passed Vehicle Record
  • Access Snapshot Device
  • Customer Analysis

Time Sync

System Parameters - Manager DSS - 5.jpg

Check the box to enable

  • Start Time - sets start time of time sync
  • Sync Interval - sets a period of time to regularly sync the server time - 2 hours by default. The time between device and server is synchronized via SDK

Click the "Immediately" button to sync time with the device immediately.


Mail Server

System Parameters - Manager DSS - 6.jpg

Check the box to enable

Set mail server IP, port, encryption type, username/password, sender and test recipient.

Click 'Mail Test' to send a test email from the server

Active Directory

System Parameters - Manager DSS - 7.jpg

Coming Soon

POS End

System Parameters - Manager DSS - 8.jpg

Coming Soon