Difference between revisions of "DVRTroubleshoot"
(→I can not use the P2P function on my cell phone or the WEB.) |
(→DDNS registration failed or can not access the device domain name.) |
||
| Line 30: | Line 30: | ||
*Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.). | *Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.). | ||
*Check the camera setup. Please make sure It supports the products of other manufacturers. | *Check the camera setup. Please make sure It supports the products of other manufacturers. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===I connect the standard definition camera to the device, there is no video output.=== | ===I connect the standard definition camera to the device, there is no video output.=== | ||
There are following possibilities: | There are following possibilities: | ||
Revision as of 22:31, 5 October 2015
Contents
- 1 I connect the general analog camera to the device, there is no video output.
- 2 I connect the standard definition analog camera or the HDCVI camera to the device, there is no video output.
- 3 I can not connect to the IP channel.
- 4 After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.
- 5 After I connected to the IP channel, there multiple*window output is OK, but there is no one*window output.
- 6 After I connected to the IP channel, there is no video output in the one*window or the multiple*window mode. But I can see there is bit stream.
- 7 I connect the standard definition camera to the device, there is no video output.
- 8 I can not connect to the IP camera.
I connect the general analog camera to the device, there is no video output.
There are following possibilities:
- Check camera power supplying, data cable connection and etc.
- This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
I connect the standard definition analog camera or the HDCVI camera to the device, there is no video output.
There are following possibilities:
- Check camera power supplying, or camera data cable connection.
- For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type and then restart the DVR.
I can not connect to the IP channel.
There are following possibilities:
- Check the camera is online or not.
- Check IP channel setup is right or not (such as IP address, user name, password, connection protocol, port number.).
- The camera has set the whitelist (Only the specified devices can connect to the camera).
After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.
There are following possibilities:
- Check the sub stream of the camera has been enabled or not.
- Check the sub stream type of the camera is H.264 or not.
- Check the device supports camera sub stream resolution or not (such as 960H, D1, HD1 and etc.).
After I connected to the IP channel, there multiple*window output is OK, but there is no one*window output.
There are following possibilities:
- Check there is video from the IP channel or not. Please go to the main menu*>info*>System*>BPS to view bit stream real*time information.
- Check the main stream of the camera has been enabled or not.
- Check the main stream type of the camera is H.264 or not.
- Check the device supports camera main stream resolution or not (such as 960H, D1, HD1 and etc.).
- Check camera network transmission has reached the threshold or not. Please check the online user of the camera.
After I connected to the IP channel, there is no video output in the one*window or the multiple*window mode. But I can see there is bit stream.
There are following possibilities:
- Check the main stream/sub stream type of the camera is H.264 or not.
- Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.).
- Check the camera setup. Please make sure It supports the products of other manufacturers.
I connect the standard definition camera to the device, there is no video output.
There are following possibilities:
- Check the DVR supports standard definition signal or not. Only some series product supports analog standard definition signal, HDCVI signal input.
- Check channel type is right or not. For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type (such as analog) and then restart the DVR. In this way, the DVR can recognize the analog standard definition.
- Check camera power supplying, or camera data cable connection.
I can not connect to the IP camera.
There are following possibilities:
- Check DVR supports IP channel or not. Only some series products support A/D switch function, it can switch analog channel to the IP channel to connect to the IP camera. From Setting*>Camera*>Channel Type, select the last channel to switch to the IP channel. Some series product products support IP channel extension, it supports N+N mode.
- Check the IPC and the DVR is connected or not. Please go to the main menu*>Setting*>Camera*>Remote to search to view the IP camera is online or not. Or you can go to the main menu*>Info*>Network*>Test, you can input IP camera IP address and then click the Test button to check you can connect to the IP camera or not.
- Check IP channel setup is right or not (such as IP address, manufacturer, port, user name, password, remote channel number and etc.).
