Difference between revisions of "FLIR/P2P Migration/Remote Access DDNS"

(Created page with "= Remote Access: DDNS Set up = Refer customer to go to '''www.lorex.com/DDNS''' In this example we will be setting up a DVR up to use a DDNS service. == Requirements == 1. A...")
 
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
= Remote Access: DDNS Set up =
+
= Remote Access: FLIR DDNS Set up =
−
Refer customer to go to '''www.lorex.com/DDNS'''
 
  
−
In this example we will be setting up a DVR up to use a DDNS service.
+
==Description==
−
== Requirements ==
+
In this example we will be setting up a FLIR DVR/NVR with DDNS service for Remote Access.
−
1. A Windows PC<br>
 
−
2. Internet Access<br>
 
−
3. Login information for network router<br>
 
−
4. Admin login for the system to be set up with DDNS<br>
 
  
−
== Step by Step ==
+
== Prerequisites ==
−
1. Set the DVR to DHCP and allow it to pull an address. Make note of the address used as it will be needed in later steps. Make note of the MAC address of the unit as well.
+
1. A Windows PC.<br>
 +
2. Internet Access.<br>
 +
3. Ports are forwarded. [https://dahuawiki.com/FLIR/P2P_Migration/Remote_Access_Port_Forwarding Click here for How to do Port Forwarding]<br>
 +
4. Access to FLIR recorder.<br>
  
−
2. At the computer, open the command prompt by opening the start menu and typing '''CMD''' into the search and double-click on the program to run. <br>
+
== Step by Step Instruction ==
−
[[File:DDNS_Setup_2.png|200px]]
 
  
−
3. Once open, enter '''ipconfig''' and press enter. Several line will be shown, look for '''Default Gateway''' and take note of the number displayed; this will be the IP address of the router.<br>
+
===Below instruction is only for FLIR model: '''D320, D330, DNR Series, IP Camera, and MPX'''. For all other models, please click [https://dahuawiki.com/FLIR/Remote_Access_DDNS2 here.] ===
−
<gallery>
 
−
File:DDNS_Setup_3.png
 
−
File:DDNS_Setup_3a.png
 
−
</gallery>
 
  
−
4. Open a browser window and in the address bar enter the address of the router; once the page loads use the router login information to login.<br>
+
1. Access your web browser, and go to '''http://ddns.myddns-flir.com'''. Click on '''Create Account'''.
−
[[File:DDNS_Setup_4.png|200px]]
 
  
−
5. In this example a DHCP Reservation will be used, the alternative if this is not an option is to use a static address. Check the router to see which option is available.
+
[[file:FlirDDNS_1.png|500px]]
  
−
6. Under the DHCP Reservation option add a new device and set the name to easily identify it. Manually add a device and enter the IP of the system as well as the MAC address associated with the device and save the changes.
+
2. Enter all information needed.
−
<gallery>
 
−
File:DDNS_Setup_6.png
 
−
File:DDNS_Setup_6a.png
 
−
</gallery>
 
−
7. Once changes have been saved, confirm that the DVR can be reached at the address given.  
 
  
−
8. At the router, locate the port forwarding option ports will be required to be opened in order to access the system with the DDNS. The required ports for remote access are the HTTP and TCP ports. The defaults are 80 and 35000 respectively, check the system '''Network''' settings > '''Connection''' to confirm port values.<br>
+
[[file:FirDDNS_2.png|500px]]
−
[[File:DDNS_Setup_8.png|200px]]
 
−
<!-- Add image for the Connection Section from FLIR NVR/DVR -->
 
  
−
9. When setting up the port forwarding, the required ports will need to be forwarded to the IP address of the DVR. The protocol should be set up for both UDP and TCP protocols.<br>
+
3. You can locate device MAC address by login in to your FLIR recorder. Go to '''Setup''' > '''Network''' > '''TCP/IP'''. You must remove the ''':''' when entering MAC address on DDNS submission.
−
[[File:DDNS_Setup_9.png|200px]]
 
  
−
10. Once port forwarding has been set up, check the port status using yougetsignal.com an open port means the forwarding is working. Confirm all ports working before proceeding.<br>
+
[[file:FirDDNS_3.png|500px]] [[file:FirDDNS_4.png|500px]]
−
<gallery>
 
−
File:DDNS_Setup_10.png
 
−
File:DDNS_Setup_10a.png
 
−
</gallery>
 
  
−
11. Login to the Lorex Account to be used for the DDNS set up. Go to the DDNS tab to set up the DDNS. Fill in the required information and hit '''Add Device''' to save the set up. The information for your DDNS will be displayed afterwards.
+
4. Click '''Create New Account'''.
−
<gallery>
 
−
File:DDNS_Setup_11.png
 
−
File:DDNS_Setup_11a.png
 
−
File:DDNS_Setup_11b.png
 
−
</gallery>
 
−
12. Now, at the DVR, under Setup > Network > DDNS enter the information provided for the DDNS. <br>
 
−
[[File:DDNS_Setup_12.png|200px]]
 
  
−
13. The unit should now be available under the new DDNS address.<br>
+
[[file:FirDDNS_5.png|500px]]
−
[[File:DDNS_Setup_13.png|200px]]
+
 
 +
5. You will see a URL when Domain Name is successfully created. You will also receive email notification with your username.
 +
 
 +
[[file:FirDDNS_6.png|500px]] [[file:FirDDNS_7.png|500px]]
 +
 
 +
6. Access the NVR DDNS setup page. Click check-mark for '''Enable'''.
 +
 
 +
[[file:FirDDNS_8.png|500px]]
 +
 
 +
7. Enter the domain name, User ID, and Password.  
 +
 
 +
[[file:FirDDNS_9.png|500px]]
 +
 
 +
8. Click '''OK'''.
 +
 
 +
9. Your DDNS is now setup for your FLIR Recorder.
 +
 
 +
For instruction on how to add FLIR device to your mobile app using DDNS, please click here.

Latest revision as of 23:03, 4 February 2020

Remote Access: FLIR DDNS Set up

Description

In this example we will be setting up a FLIR DVR/NVR with DDNS service for Remote Access.

Prerequisites

1. A Windows PC.
2. Internet Access.
3. Ports are forwarded. Click here for How to do Port Forwarding
4. Access to FLIR recorder.

Step by Step Instruction

Below instruction is only for FLIR model: D320, D330, DNR Series, IP Camera, and MPX. For all other models, please click here.

1. Access your web browser, and go to http://ddns.myddns-flir.com. Click on Create Account.

FlirDDNS 1.png

2. Enter all information needed.

FirDDNS 2.png

3. You can locate device MAC address by login in to your FLIR recorder. Go to Setup > Network > TCP/IP. You must remove the : when entering MAC address on DDNS submission.

FirDDNS 3.png FirDDNS 4.png

4. Click Create New Account.

FirDDNS 5.png

5. You will see a URL when Domain Name is successfully created. You will also receive email notification with your username.

FirDDNS 6.png FirDDNS 7.png

6. Access the NVR DDNS setup page. Click check-mark for Enable.

FirDDNS 8.png

7. Enter the domain name, User ID, and Password.

FirDDNS 9.png

8. Click OK.

9. Your DDNS is now setup for your FLIR Recorder.

For instruction on how to add FLIR device to your mobile app using DDNS, please click here.

Retrieved from "https://DahuaWiki.com/index.php?title=FLIR/P2P_Migration/Remote_Access_DDNS&oldid=54316"