Difference between revisions of "IPPTZ/Pelco and RS485"
(Created page with "=Pelco and RS485= ==IP PTZs== Disclaimer: Depending on your PTZ model, these features might not work. *Call preset 28 or preset 95 to go to dome menu *Call preset 29 or pres...") |
(→HD-CVI PTZs) |
||
| Line 16: | Line 16: | ||
*Set preset 23 or 80 to stop record. | *Set preset 23 or 80 to stop record. | ||
==HD-CVI PTZs== | ==HD-CVI PTZs== | ||
| + | '''Please note the IR speed dome can automatically recognize the industrial standard protocol, PELCO-D. PELCO-P. Usually you do not need to set the protocol.''' | ||
Revision as of 14:41, 29 April 2019
Pelco and RS485
IP PTZs
Disclaimer: Depending on your PTZ model, these features might not work.
- Call preset 28 or preset 95 to go to dome menu
- Call preset 29 or preset 99 to go to scan.
- Call preset 24 or preset 81 to go to pattern.
- Call preset 25 or preset 82 to go to tour.
- Call preset 30 or preset 96 to stop scan or pattern.
- Call preset 31 or preset 83 to begin rotation.
- Call preset 33 to enable PTZ 180 degrees rotation.
- Call preset 34 to set dome position as 0.
- Set preset 26 or 92 to set scan left limit
- Set preset 27 or 93 to set scan right limit.
- Set preset 22 or 79 to begin record.
- Set preset 23 or 80 to stop record.
HD-CVI PTZs
Please note the IR speed dome can automatically recognize the industrial standard protocol, PELCO-D. PELCO-P. Usually you do not need to set the protocol.
