NVR/Basic Setup/Smart Add

Revision as of 19:12, 23 October 2015 by JP (talk | contribs)

Smart Add

Accessing Smart Add

  • Method 1: From the startup wizard, click Smart add button.

NVRSmartAdd1.png

  • Method 2: On the preview interface, right click mouse and then select Smart add.

NVRSmartAdd2.png Now you can go to the smart add interface. NVRSmartAdd3.png Click smart add button, you can see device enables DHCP function. NVRSmartAdd4.png System pops up the following interface for you to confirm IP information if there are several IP segments NVRSmartAdd5.png Now you can see system is auto adding IPC to the corresponding channels. NVRSmartAdd6.png You can see the following dialog box after system successfully added network cameras. NVRSmartAdd7.png

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Basic_Setup/Smart_Add&oldid=1680"