New GUI/AI/Intrusion Setup

Revision as of 19:50, 7 August 2019 by Marques.Phillips (talk | contribs)

How To Setup Intrusion Detection

Description

This article will show you how to setup the Intrusion IVS feature on a supported device

Prerequisites

  • Supported device with Intrusion feature

Video Instructions

Step by Step Instructions

How To Setup Intrusion - NewUI - 1.jpg

How To Setup Intrusion - NewUI - 2.jpg

How To Setup Intrusion - NewUI - 3.jpg

How To Setup Intrusion - NewUI - 4.jpg

How To Setup Intrusion - NewUI - 5.jpg

How To Setup Intrusion - NewUI - 6.jpg
















1. Enter the Main Menu

  • Right click at live view then select "Main Menu"

Tripwire Setup - NewGUI - 1.jpg

2. Click Smart Detection

Tripwire Setup - NewGUI - 2.jpg

3. Click Smart Plan

Tripwire Setup - NewGUI - 3.jpg

4. Click to Select IVS (Light Bulb icon)

Tripwire Setup - NewGUI - 4.jpg

When enabled the icon will highlight

Click Apply to save changes

Tripwire Setup - NewGUI - 5.jpg

6. Click Parameters

Tripwire Setup - NewGUI - 6.jpg

7. Use the dropdown box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

Tripwire Setup - NewGUI - 7.jpg

8. The created rule will appear in the list

Tripwire Setup - NewGUI - 8.jpg

9. Use the dropdown box to change the Rule Type to "Intrusion"

How To Setup Intrusion - NewUI - 1.jpg