Difference between revisions of "New GUI/Instructions/Motion Record"

Line 2: Line 2:
  
 
==Description==
 
==Description==
This article will go over Motion Recording setup on the recorder's new GUI
+
This article will go over Motion Recording setup in detail on the recorder's new GUI
  
 
==Prerequisites==
 
==Prerequisites==
*Dahua device with new GUI
+
*Dahua Recorder with new GUI
 +
*Dahua Camera
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==

Revision as of 17:37, 10 April 2018

New GUI - Motion Record Setup

Description

This article will go over Motion Recording setup in detail on the recorder's new GUI

Prerequisites

  • Dahua Recorder with new GUI
  • Dahua Camera

Step by Step Instructions

1. On the main menu go to Management

NGUIMotionRecord-1.jpg

2. Click on Camera

NGUIMotionRecord-2.jpg

3. Under Camera select "Video Detect" to enter the Motion Detect settings and enable the functions for your application

NGUIMotionRecord-3.jpg

4. Click on "Settings" next to region to modify hot spots.

Note-Colored boxes detect motion, transparent boxes do not detect motion

NGUIMotionRecord-4.jpg

5. Click on "More Settings" to open up the rest of the options for Motion Detect

NGUIMotionRecord-5.jpg

6. After configuring the settings, check "Enable MD" to enable motion detect and save the configurations by clicking on "Save"

NGUIMotionRecord-6.jpg

7. We need to setup a schedule now so go to "Management" and click on "Storage"

NGUIMotionRecord-7.jpg

8. Select the channel you are working with and go to settings

NGUIMotionRecord-8.jpg

9. For this example we are doing Motion recording only for everyday of the week

NGUIMotionRecord-9.jpg

10. After setting up a schedule make sure you save any changes. Next go to "Record"

  • Note- Going to "Copy" will allow you copy the current settings to other channels

NGUIMotionRecord-10.jpg

11. Make sure the channel(s) you are working with is set to "Auto" for the streams you want to enable. After doing so, exit the "Storage" tab.

NGUIMotionRecord-11.jpg

12. Go to "Video"

NGUIMotionRecord-12.jpg

13. You can now check recording for motion. It will be indicated with yellow bars

NGUIMotionRecord-13.jpg