Difference between revisions of "SmartPSS/Face Detect"

Line 64: Line 64:
  
  
10.
+
10. To set a schedule for the IVS Face Detect Rule click the Config button
 +
 
 +
[[File:Face_Detect_SmartPSS2_-_11.jpg|600px]]
 +
 
 +
11. Use the menu to configure a schedule for the IVS rule. By default it will be set to 24/7. Click Save once the schedule has been set.
 +
 
 +
[[File:Face_Detect_SmartPSS2_-_12.jpg|600px]]
 +
 
 +
 
 +
12. Click Save to finish creating the IVS Face Detect rule
 +
 
 +
[[File:Face_Detect_SmartPSS2_-_13.jpg|600px]]

Revision as of 23:03, 13 May 2019

How To Use Face Detect In SmartPSS

Description

This article will show you how to use the Face Detect feature on a supported device using SmartPSS

Prerequisites

Video Instructions

EmbedVideo received the bad id "Coming Soon" for the service "youtube".

Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click Device CFG

Face Detect SmartPSS2 - 1.jpg

3. Click to select the device from the device tree on the left

Face Detect SmartPSS2 - 2.jpg

4. Click the Event tab

Face Detect SmartPSS2 - 3.jpg


5. Click the Intelligent to open IVS Rule Setup

Face Detect SmartPSS2 - 4.jpg


6. In the pop up menu that appears, first select the Channel No. you wish to configure then click OK

Face Detect SmartPSS2 - 5.jpg

7. On the Smart Plan page, if an existing rule is already setup (highlighted) click it once to de-select

Face Detect SmartPSS2 - 6.jpg

Then click to select the Face Detect icon then click Next

Face Detect SmartPSS2 - 7.jpg


8.Click the checkbox to Enable the rule. To draw the detection zone for Face Detection click 'Re-draw'

Face Detect SmartPSS2 - 8.jpg

9. Left click inside the video frame to draw the detection zone.

Face Detect SmartPSS2 - 9.jpg


Once finished Right click to complete the zone


Face Detect SmartPSS2 - 10.jpg


10. To set a schedule for the IVS Face Detect Rule click the Config button

Face Detect SmartPSS2 - 11.jpg

11. Use the menu to configure a schedule for the IVS rule. By default it will be set to 24/7. Click Save once the schedule has been set.

Face Detect SmartPSS2 - 12.jpg


12. Click Save to finish creating the IVS Face Detect rule

Face Detect SmartPSS2 - 13.jpg