Difference between revisions of "Template:RS485 SystemUI OldGUI"

Latest revision as of 19:36, 24 January 2020

1. From Live View right click

Select Main Menu

2. Under Setting

Click Camera

3. Click System

4. Click PTZ

5. Use the dropdown box to select the Channel

6. Use the dropdown box to change PTZ Type to Local

7. Enter the desired settings for the RS485 communication

8. Click Apply then Save to save the settings

@@ Line 1: / Line 1: @@
 ==Prerequisites==
+* Dahua recorder with RS485 port
+==Video Instructions==
+<embedvideo service="youtube">https://youtu.be/i3vYd5XmyVk</embedvideo>
+==Step by Step Instructions==
+. From Live View right click
+Select Main Menu
+[[File:RS485_-_SystemUI_Old_-_1.jpg|600px]]
+. Under Setting
+Click Camera
+[[File:RS485_-_SystemUI_Old_-_2.jpg|600px]]
+. Click System
+[[File:RS485_-_SystemUI_Old_-_3.jpg|600px]]
+. Click PTZ
+[[File:RS485_-_SystemUI_Old_-_4.jpg|600px]]
+. Use the dropdown box to select the Channel
+[[File:RS485_-_SystemUI_Old_-_5.jpg|600px]]
+. Use the dropdown box to change PTZ Type to Local
+[[File:RS485_-_SystemUI_Old_-_6.jpg|600px]]
-. Dahua Recorder using the old GUI
+. Enter the desired settings for the RS485 communication
-. Mouse/Monitor Connected to the device
+* Protocol
+* Address
+* Baud Rate
+* Data Bit
+* Stop Bit
+* Parity
-==Video Instructions==
+[[File:RS485_-_SystemUI_Old_-_7.jpg|600px]]
-<embedvideo service="youtube">https://youtu.be/GNNKFojjtBo</embedvideo>
+. Click Apply then Save to save the settings
-==Step By Step Instructions From local Monitor==
+[[File:RS485_-_SystemUI_Old_-_8.jpg|600px]]