Difference between revisions of "Template:SMD WebUI Old"

(Prerequisites)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
 
==Prerequisites==
 
==Prerequisites==
 +
* Dahua device that supports SMD
 
==Video Instructions==
 
==Video Instructions==
 
<embedvideo service="youtube">https://youtu.be/FS83lrShTh4</embedvideo>
 
<embedvideo service="youtube">https://youtu.be/FS83lrShTh4</embedvideo>
 +
==Step by Step Instructions==
 +
1. Enter the username and password for the device
 +
 +
Click Login
 +
 +
[[File:SMD_-_WebUI_Old_-_1.jpg|600px]]
 +
 +
2. Click Setting
 +
 +
[[File:SMD_-_WebUI_Old_-_2.jpg|600px]]
 +
 +
3. Click Event > Video Detection
 +
 +
[[File:SMD_-_WebUI_Old_-_2-1.jpg|600px]]
 +
 +
4. Check the box to enable the motion detection
 +
 +
Configure any additional motion detection parameters
 +
 +
[[File:SMD_-_WebUI_Old_-_2-2.jpg|600px]]
 +
 +
5. Click Save
 +
 +
[[File:SMD_-_WebUI_Old_-_2-3.jpg|600px]]
 +
 +
6. Click Event > Smart Motion Detection
 +
 +
[[File:SMD_-_WebUI_Old_-_3.jpg|600px]]
 +
 +
7. Check the box to enable the Smart Motion Detection
  
== How to Setup SMD using the WebUI Old ==
+
[[File:SMD_-_WebUI_Old_-_4.jpg|600px]]
=== Prerequisites ===
 
  
* WebUI Old.
+
8. Use the additional options to configure the parameters of SMD:
  
1. Login.
+
* Effective Target - Human, Vehicle, or Both
<br>
+
* Sensitivity
[[File:O_WUI1.JPG|400px]]
 
  
 +
[[File:SMD_-_WebUI_Old_-_5.jpg|600px]]
  
2. Go to the "Setting" tab.
+
9. Click Save
<br>
 
[[File:O_WUI2.JPG|400px]]
 
  
==Step by Step Instructions==
+
[[File:SMD_-_WebUI_Old_-_6.jpg|600px]]

Latest revision as of 18:22, 24 January 2020

Prerequisites

  • Dahua device that supports SMD

Video Instructions

Step by Step Instructions

1. Enter the username and password for the device

Click Login

SMD - WebUI Old - 1.jpg

2. Click Setting

SMD - WebUI Old - 2.jpg

3. Click Event > Video Detection

SMD - WebUI Old - 2-1.jpg

4. Check the box to enable the motion detection

Configure any additional motion detection parameters

SMD - WebUI Old - 2-2.jpg

5. Click Save

SMD - WebUI Old - 2-3.jpg

6. Click Event > Smart Motion Detection

SMD - WebUI Old - 3.jpg

7. Check the box to enable the Smart Motion Detection

SMD - WebUI Old - 4.jpg

8. Use the additional options to configure the parameters of SMD:

  • Effective Target - Human, Vehicle, or Both
  • Sensitivity

SMD - WebUI Old - 5.jpg

9. Click Save

SMD - WebUI Old - 6.jpg