TestPage

Revision as of 18:03, 15 August 2016 by Qi (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

[[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]][[Image:]]== CD-ROM Installation == Please follow the steps listed below.


[[Image:]] [[Image:]]


[[Image:]]

# Open top cover and then remove the HDD bracket


# Take off the bottom of the HDD bracket and CD-ROM bracket.


[[Image:]] [[Image:]]


[[Image:]]

# Fix the CD-ROM bracket at the HDD bracket.


# Install a pair of the CD-ROM bracket. Please make sure the reverse side is secure too.


[[Image:]] [[Image:]]
# Install SATA burner. Line up the SATA burner to the hole positions.


# User screwdriver to fix the screws.


[[Image:]] [[Image:]]
# Put the bracket back. Please adjust the CD-ROM to the proper position so that the button of the front panel is directly facing the pop-up button of the CD-ROM.


# Connect the SATA cable and power wire.


[[Image:]]
# Secure the HDD bracket and put the top cover back.