Difference between revisions of "Thermal/Calibrate Blackbody"

Line 25: Line 25:
  
 
- Leave the black box permanently at 35°C (95°F) <br />
 
- Leave the black box permanently at 35°C (95°F) <br />
- Move the green region over the Blackbody Box
+
- Draw the area around the inner plate of the Blackbody box for accurate readings
  
[[File:Configure Blackbody-3.png|800px]]
+
[[File:Thermal Monitoring Setup-4.png|800px]]
  
The Blackboby box will indicate the temperature when completed
+
Make sure the Blackbody box is set to 35°C to reflect the settings in the camera
  
 
[[File:Configure Blackbody-4.JPG|800px]]
 
[[File:Configure Blackbody-4.JPG|800px]]

Revision as of 22:07, 29 April 2020

How to Configure the Blackbody

Description

This article will go over how to configure the Blackbody.

Prerequistes

  • DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
  • JQ-D70Z Blackbody

Video Instructions

Step by Step Instructions

1. Login to the Thermal Camera

Configure Blackbody-1.png

2. Go to Smart Thermal> Smart Plan> and enable Thermal Temperature Monitor. Save

Configure Blackbody-2.png

3. On the left menu tab go to Thermal Temperature>Blackbody Parameter and enable.

- Leave the black box permanently at 35°C (95°F)
- Draw the area around the inner plate of the Blackbody box for accurate readings

Thermal Monitoring Setup-4.png

Make sure the Blackbody box is set to 35°C to reflect the settings in the camera

Configure Blackbody-4.JPG