Difference between revisions of "Thermal/DH-TPC-HT2201/Instructions/Capture Snapshots Videos"

 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<div class="fa-3x">
 
  <i class="fas fa-cog fa-spin"></i> UNDER CONSTRUCTION
 
</div>
 
 
 
=How to Capture Snapshots and Videos=
 
=How to Capture Snapshots and Videos=
  
 
==Description==
 
==Description==
[Description goes here]
+
This article covers how to take snapshots and videos on a DH-TPC-HT2201
  
 
==Prerequisites==
 
==Prerequisites==
* [Prerequisites go here]
+
* DH-TPC-HT2201
 +
* A micro SD Card installed and formatted
 +
'''Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.'''
  
 
==Video Instructions==
 
==Video Instructions==
<embedvideo service="youtube">https://www.youtube.com/watch?v=test</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/s7ZPM3OGZVA</embedvideo>
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==
  
1 . [Steps go here]
+
1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times
 +
 
 +
[[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]]
 +
 
 +
2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it.
 +
<br>The snapshot will be accessible from the installed SD Card
 +
 
 +
[[File:DH-TPC-HT2201_SnapshotsVideo2.PNG|400px]]
 +
 
 +
3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times
 +
 
 +
[[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]]
 +
 
 +
4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up
 +
 
 +
[[File:DH-TPC-HT2201_SnapshotsVideo3.PNG|400px]]
 +
 
 +
5. When you are done recording video, pull the trigger 3 times to stop recording
 +
 
 +
[[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]]
 +
 
 +
6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it.
 +
<br>The recorded video will be accessible from the installed SD Card
 +
 
 +
[[File:DH-TPC-HT2201_SnapshotsVideo4.PNG|400px]]

Latest revision as of 22:43, 30 September 2020

How to Capture Snapshots and Videos

Description

This article covers how to take snapshots and videos on a DH-TPC-HT2201

Prerequisites

  • DH-TPC-HT2201
  • A micro SD Card installed and formatted

Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.

Video Instructions

Step by Step Instructions

1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times

DH-TPC-HT2201 SnapshotsVideo1.PNG

2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it.
The snapshot will be accessible from the installed SD Card

DH-TPC-HT2201 SnapshotsVideo2.PNG

3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times

DH-TPC-HT2201 SnapshotsVideo1.PNG

4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up

DH-TPC-HT2201 SnapshotsVideo3.PNG

5. When you are done recording video, pull the trigger 3 times to stop recording

DH-TPC-HT2201 SnapshotsVideo1.PNG

6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it.
The recorded video will be accessible from the installed SD Card

DH-TPC-HT2201 SnapshotsVideo4.PNG