Thermal/DHI-ASI7213X-T1/Instructions/Adjust Volume
Contents
DHI-ASI7213X-T1 Adjust Volume
Description
This guide will cover how to adjust volume on the thermal monitoring station.
Prerequisites
Video Instruction
Step by Step Instruction
Prerequisites
- LincX2PRO device
- Dahua NVR, DVR, or XVR, on same network as LincX2PRO device
Video Instructions
Step By Step Instructions
1. From the Main Menu
Click Camera
2. Under Registration
Click Search
The recorder will scan the local network for devices
3. Find the device in the list
Check the box next to the device in the list
Click Add
4. The device will move to Added Device
Click the Pencil icon under Modify to change any settings form the device, such as Password or Port information (if required)
5. Once the device is successfully connected you will see a green light under status
6. The device video feed will appear in Live View
Step By Step Instructions
1. From the Main Menu of the WebUI
Click Management
Click Camera
2. Under Registration
Click Device Search
The recorder will scan the local network for devices
3. If the device does not appear you can add it manually
Click Manual Add
4. The Manual Add interface will appear
Enter the corect information for the device
- IP Address
- TCP Port
- Username
- Password
Click OK
5. The device will move to Added Device
Click the Pencil icon under Modify to change any settings form the device, such as Password or Port information (if required)
6. Once the device is successfully connected you will see a green light under status
7. The device video feed will appear in live view