Thermal/DHI-ASI7213X-T1/Instructions/Update Firmware via USB

Revision as of 20:55, 8 June 2020 by Marques.Phillips (talk | contribs)

Update Firmware via USB

Update Firmware via WebUI

Prerequisites

  • DHI-ASI7213X-T1
  • LAN Access from a Windows PC
  • Internet Explorer or Chrome

Video Instructions

Step by Step Instructions

Download the firmware files for the device (3 in total):


1. Log into the webUI of the device by typing the IP address into Internet Explorer

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 1.jpg

2. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 2.jpg

3. Click Browse

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 3.jpg

4. Select the firmware file, click Open

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 4.jpg

5. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 5.jpg

A prompt will appear showing the status of the update:

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 6.jpg

A message will confirm a successful upgrade and the unit will reboot

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 7.jpg

Repeat the process for all required firmware files

Troubleshooting

In the event the MCU firmware update fails:

Firmware Update error.png

  • Power down unit
  • Reconnect/secure the module
  • Power device on
  • Attempt Firmware upgrade again
  • Make sure the module is properly connected, then attempt the firmware update again

Troubleshooting

In the event the MCU firmware update fails,

Firmware Update error.png

make sure the module is properly connected, then attempt the firmware update again