Difference between revisions of "Troubleshoot/NVR/Rebooting System"
(Created page with "===NVR randomly rebooting=== * Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible.") |
|||
| Line 1: | Line 1: | ||
| − | ===NVR | + | ===NVR Randomly Rebooting or Shutting Down === |
* Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible. | * Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible. | ||
| + | There are following possibilities: | ||
| + | *Input voltage is not stable or it is too low. | ||
| + | *HDD malfunction or something wrong wit the ribbon. | ||
| + | *Button power is not enough. | ||
| + | *Front video signal is not stable. | ||
| + | *Working environment is too harsh, too much dust. | ||
| + | *Hardware malfunction. | ||
Revision as of 22:05, 5 October 2015
NVR Randomly Rebooting or Shutting Down
- Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible.
There are following possibilities:
- Input voltage is not stable or it is too low.
- HDD malfunction or something wrong wit the ribbon.
- Button power is not enough.
- Front video signal is not stable.
- Working environment is too harsh, too much dust.
- Hardware malfunction.
