USA/IPCamera/PTZ/Pro/40212TNI

40212TNI

50230UNI.png

QSGDownloadBanner.jpg

float

Features

  • 1/2.8-in. 2 MP STARVIS™ CMOS Sensor
  • Starlight Technology for Ultra-low Light Sensitivity
  • 12x Optical Zoom
  • Triple-stream Encoding
  • H.265 and H.264 Dual Codecs
  • 1080p at 30 fps Maximum Resolution
  • Intelligent Video System (IVS)
  • IP66 Ingress Protection and IK10 Vandal Resistance
  • PoE+ Support
  • Five-year Warranty (for products sold through authorized Dahua Dealers)

Firmware

Firmware Update Instructions

Firmware Update Download

Specifications


Hardware Reset Instructions

In order to access the hardware reset button on the camera you must remove the outer casing and shell.

Remove the 2 anchoring screws , 1 is circled in the below image the other screw will located on the opposite side (not pictured)

40212TNI HW reset 1.jpg


Screw removed:

40212TNI HW reset 2.jpg

You can now remove the outer black shell protecting the camera's internals:

40212TNI HW reset 3.JPG


40212TNI HW reset 4.jpg

Press and hold the reset button for 30 seconds with the camera powered on.

After 30 seconds the camera should reset, if it does not work try the reset procedure a second time.