Difference between revisions of "VideoLossCam"
(Created page with "===After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.=== There are following possibilities: *Check the sub stream of t...") |
(No difference)
|
Revision as of 23:05, 5 October 2015
After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.
There are following possibilities:
- Check the sub stream of the camera has been enabled or not.
- Check the sub stream type of the camera is H.264 or not.
- Check the device supports camera sub stream resolution or not (such as 960H, D1, HD1 and etc.).
