Difference between revisions of "Video Intercom/SIP 2.0/How To Add VTO4202 To DSSPro Via Configtool"
| Line 5: | Line 5: | ||
==Pre-requisites== | ==Pre-requisites== | ||
| − | Initialized VDP Devices. Follow our guide [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool|here]] before continuing | + | * Initialized VDP Devices. Follow our guide [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool| here]] before continuing |
| − | + | * [https://dahuawiki.com/DSS/DSS_Pro| DSS Pro] | |
| − | + | * [https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip| Configtool] | |
==Video Instructions== | ==Video Instructions== | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| + | |||
| + | 1. | ||
Revision as of 16:59, 5 May 2021
Contents
How To Add VTO4202 To DSSPro Via Configtool
Description
This article will go over DHI-VTO4202F setup to DSS Pro using Configtool
Pre-requisites
- Initialized VDP Devices. Follow our guide here before continuing
- DSS Pro
- Configtool
Video Instructions
Step by Step Instructions
1.
