Difference between revisions of "Video Intercom/SIP 2.0/How To Add VTO4202 To VTH Via Configtool"
| Line 16: | Line 16: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1. | + | 1. Once devices are initialized go to '''Building Config''' |
[[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-1.png|900px]] | [[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-1.png|900px]] | ||
| − | 2. | + | 2. Go to '''Global Parameter''' |
[[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-2.png|900px]] | [[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-2.png|900px]] | ||
| − | 3. | + | 3. Global Parameters |
| + | {| class="wikitable" | ||
| + | |- | ||
| + | ! colspan="2"| Global Parameter | ||
| + | |- | ||
| + | | Center Number = Leave Default | ||
| + | | Server Type = VTO | ||
| + | |- | ||
| + | | Sever Address = Main VTO IP Address | ||
| + | | Server Port = 5060 | ||
| + | |- | ||
| + | | Sever Username = Recommended to match VTO username | ||
| + | | Sever Password = Recommended to match VTO password | ||
| + | |- | ||
| + | | Sip Domain = VDP | ||
| + | | Register PWD = Leave Default | ||
| + | |- | ||
| + | | VTO Username = Enter VTO username | ||
| + | | VTO Password = Enter VTO password | ||
| + | |- | ||
| + | | VTH Username = Enter VTH username | ||
| + | | VTH Password = Enter VTH Password | ||
| + | |} | ||
| + | |||
| + | Enter the information by following the table above. Click on '''OK''' to proceed | ||
[[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-3.png|900px]] | [[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-3.png|900px]] | ||
| − | 4. | + | 4. Create a project by clicking on '''Add Node''' |
[[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-4.png|900px]] | [[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-4.png|900px]] | ||
| − | 5. | + | 5. Select the amount of Floors and Rooms will be added to the project. In this guide we will only have 1 floor with 1 room with 0 extensions for each room. Click on '''OK''' |
[[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-5.png|900px]] | [[File:How to Setup 2Wire IP Modular Station to VTH using ConfigTool-5.png|900px]] | ||
Revision as of 19:10, 4 May 2021
Contents
How to add DHI-VTO4202F to VTH via Configtool
Description
This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software.
Please be sure to have followed our How to Initialize Video Intercom using Configtool Guide ---> Here
Pre-requisites
- Initialized DHI-VTO4202F
- Initialized DHI-VTH5422HW or DHI-VTH2421FW-P
- Configtool 5.000.0000001.7
Video Instructions
Step by Step Instructions
1. Once devices are initialized go to Building Config
2. Go to Global Parameter
3. Global Parameters
| Global Parameter | |
|---|---|
| Center Number = Leave Default | Server Type = VTO |
| Sever Address = Main VTO IP Address | Server Port = 5060 |
| Sever Username = Recommended to match VTO username | Sever Password = Recommended to match VTO password |
| Sip Domain = VDP | Register PWD = Leave Default |
| VTO Username = Enter VTO username | VTO Password = Enter VTO password |
| VTH Username = Enter VTH username | VTH Password = Enter VTH Password |
Enter the information by following the table above. Click on OK to proceed
4. Create a project by clicking on Add Node
5. Select the amount of Floors and Rooms will be added to the project. In this guide we will only have 1 floor with 1 room with 0 extensions for each room. Click on OK
6.
7.
8.
9.
10.
