Video Intercom/SIP 2.0/How To Add VTO4202 To VTH Via Configtool

Revision as of 18:32, 4 May 2021 by William.V (talk | contribs)

How to add DHI-VTO4202F to VTH via Configtool

Description

This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software.

Please be sure to have followed our How to Initialize Video Intercom using Configtool Guide ---> Here

Pre-requisites

Video Instructions

Step by Step Instructions

1.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-1.png

2.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-2.png

3.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-3.png

4.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-4.png

5.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-5.png

6.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-6.png

7.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-7.png

8.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-8.png

9.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-9.png

10.

How to Setup 2Wire IP Modular Station to VTH using ConfigTool-10.png

Retrieved from "https://DahuaWiki.com/index.php?title=Video_Intercom/SIP_2.0/How_To_Add_VTO4202_To_VTH_Via_Configtool&oldid=72930"