Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Video Intercom"
(→VTH: Indoor Monitor) |
|||
(200 intermediate revisions by 10 users not shown) | |||
Line 1: | Line 1: | ||
− | ==Video Intercom== | + | ==Dahua Video Intercom== |
− | |||
− | |||
− | |||
+ | = <div class="center">GEN3 (Latest Generation)</div> [[File:DHI_KTP01_image_web.png|100px|link=]] = | ||
+ | ==Description== | ||
+ | The One-Key Config feature is only available on a few VTHs. Please check the device list below to see what models are compatible | ||
+ | |||
+ | ==Instructions== | ||
+ | {| class="wikitable" | ||
+ | !colspan="3"|Initializing Video Intercom | ||
+ | |- | ||
+ | |colspan="3" style="text-align: center;"| | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool|How to Initialize Video Intercom using Configtool]]<br /> | ||
+ | [[Video_Intercom/VTH_Password_Reset_XML|How to Reset VTH Password Using VDPConfig]]<br /> | ||
+ | |- | ||
+ | !colspan="2"|DHI-VTO4202F (Modular) Setup !!rowspan="3"| [[file:VTO4202F-P two three module image web.png|100px]] | ||
+ | |- | ||
+ | !Manual Setup | ||
+ | | | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Setup_And_Program_Modules_On_DHI-VTO4202F-P-S2|How to setup and program Modules on DHI-VTO4202F-P-S2]]<br /> | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Call_DMSS|How to make calls to DMSS (With Custom License Firmware Only)]]<br /> | ||
+ | |- | ||
+ | ! '''Configtool Setup''' | ||
+ | | | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Add_VTO4202_To_VTH_Via_Configtool|How to setup DHI-VTO4202F-P-S2 with Indoor Monitor via ConfigTool]]<br /> | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Add_More_VTHs_To_Modular_Video_Intercom|How to add additional VTH (Indoor Monitor) for a DHI-VTO4202F-P-S2]]<br /> | ||
+ | [[Video_Intercom/SIP_2.0/How_to_setup_DHI-VTO4202F-P-S2_with_Multiple_Floors_via_ConfigTool|How to setup DHI-VTO4202F-P-S2 with Multiple Floors using Configtool]]<br /> | ||
+ | |- | ||
+ | !colspan="2"|Stand Alone VTO and VTH !! rowspan="2"|[[file:DHI KTP01 image web.png|100px]] | ||
+ | |- | ||
+ | !One-Key Config | ||
+ | | | ||
+ | [[Video_Intercom/SIP_2.0/Single_VTH_and_VTO_Onekey_Config_Setup|Single VTH and VTO One Key Config Setup]]<br /> | ||
+ | [[Video_Intercom/SIP_2.0/Multiple_VTH_and_VTO_One-Key_Config_Setup|Multiple VTH and VTO One Key Config Setup]]<br /> | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Add_Secondary_VTO_To_Existing_Intercom_Kit|How to add secondary VTO to existing Intercom Kit]]<br /> | ||
+ | |- | ||
+ | !colspan="2" style="text-align: center;"| SmartPSS Lite !!rowspan="2" style="text-align: center;"|[[File:SmartPSSLite.png|100px]] | ||
+ | |- | ||
+ | !SmartPSS Lite Setup | ||
+ | | | ||
+ | [[Video_Intercom/VTO_with_SPSSLite|How to setup a VTO with SmartPSS Lite]]<br /> | ||
+ | |- | ||
+ | !colspan="2" style="text-align: center;"| DSS !!rowspan="2" style="text-align: center;"|[[File:DSS Pro V8 Logo.jpg|100px]] | ||
+ | |- | ||
+ | !DSS Pro V8 | ||
+ | | | ||
+ | [[Video_Intercom/VTH_and_VTO_Setup_on_DSS_Pro_V8|How to setup VTH and VTO to DSS Pro V8]]<br /> | ||
+ | [[Video_Intercom/SIP_2.0/How_To_Forward_Calls_To_DSS_Pro_Client|How to Forward calls to DSS Pro Client]]<br /> | ||
+ | |- | ||
+ | ! colspan="2"|DMSS !!rowspan="2"|[[file:DMSS_New_Icon.png|100px]] | ||
+ | |- | ||
+ | |colspan="2" style="text-align: center;"| | ||
+ | [[Video_Intercom/SIP_2.0/VTO_Initialization_via_DMSS|How to initialize VTO through DMSS App]]<br /> | ||
+ | |- | ||
+ | ! colspan="2"| Physical Wiring Setup !!rowspan="2"|[[File:DEE1010B.jpg|100px]] | ||
+ | |- | ||
+ | |colspan="2" style="text-align: center;"| | ||
+ | [[Solution_Delivery/Video_Intercom_Second_Door_Using_DEE1010B|How to setup Second Lock on VTO]]<br /> | ||
+ | [[Solution_Delivery/Integrating_Video_Intercom_with_Acccess_Control|Integrating VTO relay to 4-Door Access Controller]]<br /> | ||
+ | |- | ||
+ | ! colspan="2"| VTH Custom Ring !!rowspan="2"|[[File:VTH2421FWl image web-1.png|90px]] | ||
+ | |- | ||
+ | |colspan="2" style="text-align: center;"| | ||
+ | [[Solution_Delivery/Video_Intercom_VTH_Custom_Audio|How to create custom audio/ring for VTH]]<br /> | ||
+ | |} | ||
+ | |||
+ | ===DSS Express Instructions=== | ||
+ | <tabber> | ||
+ | DSS Express V8= | ||
+ | *[[Video_Intercom/VTH_and_VTO_Setup_on_DSS_Express_V8|VTH and VTO Setup on DSS Express V8]] | ||
+ | *[[Video_Intercom/DSS_Express_V8_VTO_Call_To_DSS_Agile_8|How to call to DSS Agile 8]] | ||
+ | *[[Video_Intercom/DSS_Express_V8_VTO_Call_To_DSS_Agile_VDP|How to call to DSS Agile VDP]] | ||
+ | *[[Video_Intercom/VideoAC_Intercom_DSS|How to set up a DHI-ASI8213SA-W to call to virtual rooms in DSS Agile VDP]] | ||
+ | *[[Video_Intercom/How_to_Integrate_Dahua_IPC_to_Video_Intercom_on_DSSExpress_V8|How to bind an IP Camera to VTO Door on DSS Express V8]] | ||
+ | |||
+ | |||
+ | |-| | ||
+ | DSS Express V7= | ||
+ | *[[Video_Intercom/SIP_2.0/VTH_and_VTO_with_DSS_Express_Setup|VTH and VTO with DSS Express V7 Setup]] | ||
+ | |-| | ||
+ | </tabber> | ||
+ | |||
+ | ==Software== | ||
+ | {| class="wikitable" style="width: 100%;" | ||
+ | ! Application | ||
+ | ! Description | ||
+ | ! Specifications | ||
+ | ! Manual | ||
+ | |- | ||
+ | |style="text-align:center;"|[[File:IPConfigTool_Icon.png|70px|]] | ||
+ | |style="text-align:center;"|[[ConfigTool|'''Configtool''']]<br> ''Locate and manage dahua devices on network'' | ||
+ | |colspan="2"|[https://dahuawiki.com/ConfigTool <ul class="fa-ul"> <li><i class="fas fa-file fa-4x" style="color:darkred;></i></li></ul>] | ||
+ | |- | ||
+ | |style="text-align:center;"|[[File:DSS_Express_Icon.png|70px|link=DSS_Express]] | ||
+ | |style="text-align:center;"|[[DSS/V8/DSS_Express|'''DSS Express V8''' <span style="color:red">(NEW)</span>]]<br> ''Pay-as-you-go Security Software for SMB'' | ||
+ | |{{Template:DSS_Express_V8_Specification_Template}} | ||
+ | |<!--{{Template:DSS_Express_V8_Manuals_Template}}--> | ||
+ | |- | ||
+ | |style="text-align:center;"|[[File:DSS_Pro_Icon.png|70px|link=DSS_Pro]] | ||
+ | |style="text-align:center;"|[[DSS/V8/DSS_Pro|'''DSS Pro V8''' <span style="color:red">(NEW)</span>]] <br> ''High Available Security Software for Enterprise'' | ||
+ | |{{Template:DSS_Pro_V8_Specification_Template}} | ||
+ | |<!--{{Template:DSS_Pro_V8_Manuals_Template}}--> | ||
+ | |- | ||
+ | |style="text-align:center;"|[[File:DSS_Express_Icon.png|70px|link=DSS_Express]] | ||
+ | |style="text-align:center;"|[[DSS_Express|'''DSS Express V7''']]<br> ''Easy-to-Use and Reliable Dahua VMS'' | ||
+ | |<!--{{Template:DSS_Express_Std_Specification_Template}}--> | ||
+ | |<!--[https://dahuawiki.com/images/Files/Manuals/DSS%20Express%20User%20Manual_ENG.pdf <ul class="fa-ul"> <li><i class="fas fa-book fa-4x" style="color:darkred;></i></li></ul>]--> | ||
+ | |- | ||
+ | |style="text-align:center;"|[[File:DSS_Pro_Icon.png|70px|link=DSS/DSS_Pro]] | ||
+ | |style="text-align:center;"|[[DSS/DSS_Pro|'''DSS Pro V7''']] <br> ''Comprehensive and Expandable Dahua VMS'' | ||
+ | |<!--{{Template:DSS_Pro_Specification_Template}}--> | ||
+ | |<!--[https://dahuawiki.com/images/Files/Manuals/DSS_Pro_Client_User_Manual_ENG.pdf <ul class="fa-ul"> <li><i class="fas fa-book fa-4x" style="color:darkred;></i></li></ul>]--> | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | ==GEN3 Devices== | ||
+ | <tabber> | ||
+ | Outdoor Station= | ||
+ | {{Template:Product_Video_Intercom_Outdoor_GEN3}} | ||
+ | |-| | ||
+ | Indoor Monitor= | ||
+ | {{Template:Product_Video_Intercom_Indoor_GEN3}} | ||
+ | |-| | ||
+ | Accessories= | ||
+ | {{Template:Product_Video_Intercom_Accessories_GEN3}} | ||
+ | |-| | ||
+ | Kits= | ||
+ | {{Template:Product_Kits_VDP}} | ||
+ | </tabber> | ||
+ | |||
+ | = <div class="center">SIP 2.0 (GEN 2 with "-S")</div>[[File:VTO2111D-WP.png|100px|link=]] = | ||
+ | ==Password Info== | ||
+ | New Generation of video intercom does not have default password. User must create a password during the device initialization. | ||
+ | |||
+ | The first and second generation video intercom has these below default password: | ||
*002236 | *002236 | ||
*888888 | *888888 | ||
Line 13: | Line 142: | ||
*Anti-hijack password initially is 654321. | *Anti-hijack password initially is 654321. | ||
− | + | '''NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.''' | |
− | + | ||
− | + | '''NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.''' | |
− | === | + | |
− | *[[ | + | '''NOTE3: Generation 2 and Generation 3 will work together as they both use SIP technology.''' |
− | *[[ | + | |
− | *[[ | + | ==Instructions== |
+ | === VDP Config Instructions=== | ||
+ | |||
+ | * [[Software/Dahua Toolbox/VDPConfig/Discover Device|How To Discover A Device In VDPConfig]] | ||
+ | * [[Software/Dahua Toolbox/VDPConfig/Modify Network Settings|How To Modify Network Settings In VDPConfig]] | ||
+ | * [[Software/Dahua Toolbox/VDPConfig/Modify System Settings|How To Modify System Settings In VDPConfig]] | ||
+ | * [[Software/Dahua Toolbox/VDPConfig/Upgrade Firmware|How To Upgrade Firmware In VDPConfig]] | ||
+ | * [[Software/Dahua Toolbox/VDPConfig/Adjust_Time|How To Adjust the time of a device in VDPConfig]] | ||
− | === | + | ===Stand Alone VTO=== |
− | + | *[[Video_Intercom/SIP_2.0/Stand_Alone_VTO2111D-WP_SIP_2.0_Setup|Stand Alone VTO2111D-WP SIP 2.0 Setup]] | |
− | [[ | ||
− | + | ===VTH and VTO Setup=== | |
+ | *[[Video_Intercom/SIP_2.0/Stand_Alone_VTH_and_VTO_Setup|Single VTH and VTO Setup]] | ||
+ | *[[Video_Intercom/SIP_2.0/Stand_Alone_Multiple_VTH_and_VTO_Setup|Multiple VTH and VTO Setup]] | ||
− | + | ===DSS Express Setup=== | |
− | + | *[[Video_Intercom/Standalone_VTO_and_DSS_Express_Setup|Standalone VTO and DSS Express Setup]] | |
− | + | *[[Video_Intercom/SIP_2.0/VTH_and_VTO_with_DSS_Express_Setup|VTH and VTO with DSS Express Setup]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | [[ | ||
− | + | ==Software and Mobile App== | |
− | + | {| class="wikitable" style="width: 100%; | |
− | |||
− | |||
− | |||
− | == | ||
− | {| class="wikitable" | ||
− | |||
|- | |- | ||
− | | | + | ! style="text-align:center;"|Application |
− | + | ! style="text-align:center;"|Icon | |
− | | | + | ! style="text-align:center;"|Description |
− | | | + | ! style="text-align:center;" colspan="2"|Downloads |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | ! style="text-align:center;" |ConfigTool |
− | |[[ | + | ! style="text-align:center;"|[[File:IPConfigTool_Icon.png|50px|Config Tool 5.0|link=https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip]] |
− | | | + | |Locate dahua devices on network and configure new generation of Video Intercom |
− | | | + | |[https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip <ul class="fa-ul"> <li><i class="fab fa-windows fa-2x" style="color:darkred;></i></li></ul>] |
− | + | |[https://dahuawiki.com/images/Files/Software/OSX/General_ConfigTool-MAC_Eng_V2.001.0000001.3.R.200630.tar.gz <ul class="fa-ul"> <li><i class="fab fa-apple fa-2x" style="color:darkred;></i></li></ul>] | |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | ! style="text-align:center;"|DSS Pro |
− | |[[File: | + | ! style="text-align:center;"|[[File:DSS_Pro_Icon.png|50px|link=https://dahuawiki.com/images/Files/Software/DSS/General_OverseasDSS-PRO_Win64_IS_V7.002.15H3000.0.R.20201030.exe]] |
− | | | + | |VMS Software |
− | | | + | |[{{Template:DSS_Icon_Main_Page}} <ul class="fa-ul"> <li><i class="fab fa-windows fa-2x" style="color:darkred;></i></li></ul>] |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | ! style="text-align:center;"|DMSS |
− | |[[ | + | ! style="text-align:center;"|[[File:DMSS_New_Icon.png|50px|link=https://dahuawiki.com/DMSS]] |
− | | | + | |Mobile Application |
− | | | + | |[https://play.google.com/store/apps/details?id=com.mm.android.DMSS&hl=en_US <ul class="fa-ul"> <li><i class="fab fa-android fa-2x" style="color:darkred;></i></li></ul>] |
− | + | |[https://apps.apple.com/us/app/dmss/id1493268178 <ul class="fa-ul"> <li><i class="fab fa-apple fa-2x" style="color:darkred;></i></li></ul>] | |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | ! style="text-align:center; text:bold" |DSS Agile VDP |
− | |[[ | + | ! style="text-align:center;|[[File:DSS_Agile_VDP_Icon.png|55px]] |
− | | | + | | Mobile monitoring software that is designed for Video Intercom Device in DSS Platform. |
− | | | + | | style="text-align:center;" |[https://play.google.com/store/apps/details?id=com.mm.dss.agile.cn&hl=en_US&gl=US <ul class="fa-ul"><li><i class="fab fa-android fa-2x" style="color:darkred;></i></li></ul>] |
− | + | ||[https://apps.apple.com/gm/app/dss-agile/id1494992846 <ul class="fa-ul"> <li><i class="fab fa-apple fa-2x" style="color:darkred;></i></li></ul>] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |[ | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
|} | |} | ||
− | ===Indoor Monitor= | + | ==SIP 2.0 Devices== |
+ | '''WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are compatible with SIP 2.0 before updating your devices''' | ||
+ | |||
+ | <tabber> | ||
+ | Outdoor Station= | ||
+ | {{Template:Product_Video_Intercom_Outdoor_SIP}} | ||
+ | |-| | ||
+ | Indoor Monitor= | ||
+ | {{Template:Product_Video_Intercom_Indoor_SIP}} | ||
+ | |-| | ||
+ | Accessories= | ||
{| class="wikitable" | {| class="wikitable" | ||
− | |+ | + | |+Accessories |
|- | |- | ||
− | | | + | |[[Video_Intercom/Products/VTNS1060A|VTNS1060A]] |
− | |[[ | + | |[[File:VTNS1060A.png|150px|link=Video_Intercom/Products/VTNS1060A]] |
− | | | + | |Network Power Supply for IP System |
| | | | ||
− | * | + | *Decent appearance |
− | * | + | *Dahua protocol network power supply switch |
− | * | + | *Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together |
− | + | |{{Template:DHI-VTNS1060A_Specification_Template}} | |
− | |||
− | |||
|- | |- | ||
− | | | + | |[[Video_Intercom/Products/VTNC3000A|VTNC3000A]] |
− | |[[ | + | |[[file:VTNC3000A.png|150px|link=Video_Intercom/Products/VTNC3000A]] |
− | | | + | |2-Wire Network Controller |
| | | | ||
− | * | + | *4 groups of 2-wire port, provide power and signal to other 2-wire devices |
− | * | + | *RJ45 port, connected LAN |
− | * | + | *Surface mounted & DIN-Rail Mounted |
− | + | |<!--{{Template:Place_Holder_Specification_Template}}--> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |[[Accessories/Power_Supply/DH_PFM321D_US|PFM321D-US]] |
− | |[[ | + | |[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM321D_US]] |
− | | | + | |Power Supply |
| | | | ||
− | * | + | *100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12 |
− | + | |{{Template:DH_PFM321D_US_Specification_Template}} | |
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |[[Accessories/Power_Supply/DH_PFM320D_US|PFM320D-US]] |
− | |[[ | + | |[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM320D_US]] |
− | | | + | |Power Supply |
| | | | ||
− | * | + | *100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12 |
− | * | + | |{{Template:DH_PFM320D_US_Specification_Template}} |
− | * | + | |- |
− | * | + | </tabber> |
− | * | + | |
− | * | + | = <div class="center">GEN 1</div> [[File:VTO2000A.png|100px|link=]] = |
− | * | + | |
− | * | + | '''NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.''' |
− | + | ||
− | + | '''NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.''' | |
− | === | + | |
+ | ==Instructions== | ||
+ | ===Stand Alone VTO=== | ||
+ | *[[Video_Intercom/How_To_Configure_A_VTO2111D_WP_With_WiFi|How To Configure A VTO2111D-WP With WiFi]] | ||
+ | ===VTH and VTO Setup=== | ||
+ | *[[Video_Intercom/How_To_Add_A_VTH1550CH_To_A_VTO1210C-X|How To Add A VTH1550CH To a VTO1210C-X]] | ||
+ | *[[Video_Intercom/How_To_Add_A_Second_VTH1550CH_To_A_VTO1210C-X|How To Add A Second VTH1550CH To A VTO1210C-X]] | ||
+ | *[[Video_Intercom/How_To_Add_A_VTH1660CH_To_A_VTO1210C-X|How To Add A Second VTH1660CH To a VTO1210C-X]] | ||
+ | *[[Video_Intercom/How_To_Add_A_VTO2111D-WP_To_A_VTH5221D|How To Add A VTO2111D-WP To a VTH5221D]] | ||
+ | *[[Video_Intercom/How_To_Add_A_Second_VTH1550CH_To_A_VTO1210C-X|How To Add A Second VTH1550CH To a VTO2111D-WP]] | ||
+ | ===DSS Express Setup=== | ||
+ | *[[Video_Intercom/How_To_Add_A_VTO2111D_WP_To_DSS_S2|How To Add A VTO2111D-WP to DSS-S2]] | ||
+ | |||
+ | |||
+ | ==GEN1 Devices== | ||
+ | '''WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are Gen 1 before updating your devices''' | ||
+ | |||
+ | <tabber> | ||
+ | Outdoor Station= | ||
+ | {{Template:Product_Video_Intercom_Outdoor}} | ||
+ | |-| | ||
+ | Indoor Monitor= | ||
+ | {{Template:Product_Video_Intercom_Indoor}} | ||
+ | |-| | ||
+ | Accessories= | ||
{| class="wikitable" | {| class="wikitable" | ||
|+Accessories | |+Accessories | ||
|- | |- | ||
− | | | + | |[[Video_Intercom/Products/VTNS1060A|VTNS1060A]] |
− | |[[File:VTNS1060A.png|150px]] | + | |[[File:VTNS1060A.png|150px|link=Video_Intercom/Products/VTNS1060A]] |
|Network Power Supply for IP System | |Network Power Supply for IP System | ||
| | | | ||
Line 182: | Line 290: | ||
*Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together | *Connect max 6 indoor monitors with the Cat 5e cable, transfer the signal and power together | ||
|- | |- | ||
− | | | + | |[[Video_Intercom/Products/VTNC3000A|VTNC3000A]] |
− | |[[file:VTNC3000A.png|150px]] | + | |[[file:VTNC3000A.png|150px|link=Video_Intercom/Products/VTNC3000A]] |
|2-Wire Network Controller | |2-Wire Network Controller | ||
| | | | ||
Line 190: | Line 298: | ||
*Surface mounted & DIN-Rail Mounted | *Surface mounted & DIN-Rail Mounted | ||
|- | |- | ||
− | |DH-PFM321D-US | + | |[[Accessories/Power_Supply/DH_PFM321D_US|PFM321D-US]] |
− | | | + | |[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM321D_US]] |
|Power Supply | |Power Supply | ||
| | | | ||
*100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12 | *100VAC~240VAC-12V1A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12 | ||
|- | |- | ||
− | |DH- | + | |[[Accessories/Power_Supply/DH_PFM320D_US|PFM320D-US]] |
− | | | + | |[[File:DH-PFM321D-US.jpg|150px|link=Accessories/Power_Supply/DH_PFM320D_US]] |
|Power Supply | |Power Supply | ||
| | | | ||
*100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12 | *100VAC~240VAC-12V2A-VI-DH-PFM321D-US-US Standard-Φ5.5×Φ2.1×12 | ||
|- | |- | ||
− | |VTOB108 | + | |[[Video_Intercom/Products/VTOB108|VTOB108]] |
− | |[[File:VTOB108.png|150px]] | + | |[[File:VTOB108.png|150px|link=Video_Intercom/Products/VTOB108]] |
|Surface Mounted Box for VTO2000A | |Surface Mounted Box for VTO2000A | ||
| | | | ||
Line 211: | Line 319: | ||
*Surface mounted box | *Surface mounted box | ||
|- | |- | ||
− | |VTOB107 | + | |[[Video_Intercom/Products/VTOB107|VTOB107]] |
− | |[[File:VTOB107.png|150px]] | + | |[[File:VTOB107.png|150px|linkVideo_Intercom/Products/VTOB107]] |
|Flush Mounted Box for VTO2000A | |Flush Mounted Box for VTO2000A | ||
| | | | ||
Line 220: | Line 328: | ||
*Flush mounted box | *Flush mounted box | ||
|- | |- | ||
− | |VTOB110 | + | |[[Video_Intercom/Products/VTOB110|VTOB110]] |
− | |[[File:VTOB110.png|150px]] | + | |[[File:VTOB110.png|150px|link=Video_Intercom/Products/VTOB110]] |
|Surface Mounted Box for VTO1210C-X | |Surface Mounted Box for VTO1210C-X | ||
| | | | ||
Line 229: | Line 337: | ||
*Surface mounted box | *Surface mounted box | ||
|- | |- | ||
− | |VTOB103 | + | |[[Video_Intercom/Products/VTOB103|VTOB103]] |
− | |[[File:VTOB103.png|150px]] | + | |[[File:VTOB103.png|150px|link=Video_Intercom/Products/VTOB103]] |
|Flush Mounted Box for VTO1210C-X | |Flush Mounted Box for VTO1210C-X | ||
| | | | ||
Line 238: | Line 346: | ||
*Flush mounted box | *Flush mounted box | ||
|} | |} | ||
+ | </tabber> | ||
+ | |||
+ | <headertabs/> | ||
+ | |||
+ | |||
+ | ==FAQ== | ||
+ | |||
+ | '''Q:''' Which model of VTO (Outdoor Station) can work stand-alone and make a call notification to DMSS when call button is pressed? | ||
+ | |||
+ | '''A:''' [[Video_Intercom/Products/DHI-VTO2202F-P|DHI-VTO2202F-P]], [[Video Intercom/Products/DHI-VTO2311R-WP|DHI-VTO2311R-WP]], [[Video Intercom/Products/DHI-VTO2211G-WP|DHI-VTO2211G-WP]], [[Video_Intercom/Products/VTO2000A-S|VTO2000A-S]], [[Video_Intercom/Products/VTO2000A_2|VTO-2000A-2-S]], [[Video_Intercom/Products/DHI_VTO2111D_WP-S|VTO2111D-WP-S]], [[Video_Intercom/Products/VTO2000A|VTO2000A]], [[Video_Intercom/Products/VTO2000A_2|VTO2000A-2]] | ||
+ | |||
+ | |||
+ | '''Q:''' Can Apartment outdoor station ([[Video_Intercom/Products/VTO1210C_X|VTO1210C-X]] and [[Video_Intercom/Products/VTO1210C_X-S|VTO1210C-X-S]] and [[Video_Intercom/Products/DHI-VTO4202F|DHI-VTO4202F]]) work with DMSS App? | ||
+ | |||
+ | '''A:''' Yes, but it requires License for firmware customization. Please reach out to your local Sales Rep or Technical Consultant. | ||
+ | |||
+ | |||
+ | '''Q:''' How do I access device config page in VTH (indoor monitor) device? | ||
+ | |||
+ | '''A:''' From the homepage, press and hold Settings button for 6 seconds. | ||
+ | |||
+ | |||
+ | '''Q:''' What the difference between Transmission 1 and Transmission 2 on the network settings? | ||
+ | |||
+ | '''A:''' '''Mode 1:''' Multicast (multicast). | ||
+ | The default is mode 1. Using multicast in a multicast network environment, the effect is best at this time<br> | ||
+ | '''Mode 2:''' Unicast (TCP), | ||
+ | If the router does not support multicast, the group call will have a black screen on VTH, then you can switch to unicast mode. In addition, if the network is particularly poor, you can also use this mode, because TCP has a retransmission mechanism to avoid frame loss. | ||
+ | |||
+ | ==SIP 2.0 Performance Chart== | ||
+ | {{Template:SIP2.0_Performance_Chart}} | ||
+ | |||
+ | {{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}} | ||
+ | |||
+ | [[Category:Model Specific Pages]] | ||
+ | |||
+ | |||
+ | |||
+ | |||
[[Category:VTO]] | [[Category:VTO]] | ||
[[Category:VTH]] | [[Category:VTH]] |
Latest revision as of 14:05, 15 April 2024
Dahua Video Intercom
Description
The One-Key Config feature is only available on a few VTHs. Please check the device list below to see what models are compatible
Instructions
Initializing Video Intercom | ||
---|---|---|
How to Initialize Video Intercom using Configtool | ||
DHI-VTO4202F (Modular) Setup | ![]() | |
Manual Setup |
How to setup and program Modules on DHI-VTO4202F-P-S2 | |
Configtool Setup |
How to setup DHI-VTO4202F-P-S2 with Indoor Monitor via ConfigTool | |
Stand Alone VTO and VTH | ![]() | |
One-Key Config |
Single VTH and VTO One Key Config Setup | |
SmartPSS Lite | ![]() | |
SmartPSS Lite Setup | ||
DSS | ![]() | |
DSS Pro V8 |
How to setup VTH and VTO to DSS Pro V8 | |
DMSS | ![]() | |
Physical Wiring Setup | ![]() | |
How to setup Second Lock on VTO | ||
VTH Custom Ring | ![]() | |
DSS Express Instructions
Software
Application | Description | Specifications | Manual |
---|---|---|---|
![]() |
Configtool Locate and manage dahua devices on network |
||
![]() |
DSS Express V8 (NEW) Pay-as-you-go Security Software for SMB |
||
![]() |
DSS Pro V8 (NEW) High Available Security Software for Enterprise |
||
![]() |
DSS Express V7 Easy-to-Use and Reliable Dahua VMS |
||
![]() |
DSS Pro V7 Comprehensive and Expandable Dahua VMS |
GEN3 Devices
Models | Image | Station Type | Generation | Specification | Manual | Main Firmware |
---|---|---|---|---|---|---|
DHI-VTO4202F | ![]() |
2-Wire IP Intercom Modular Apartment Outdoor Station | SIP | Build Date: 08-13-2022
| ||
DHI-VTO2311R-WP | ![]() |
WiFi Villa Outdoor Station | SIP | Build Date: 08-25-2023
| ||
DHI-VTO2202F-P-S2 | ![]() |
2-Wire IP Villa Outdoor Station | SIP | Build Date: 08-13-2022
| ||
DHI-VTO2202F-P | ![]() |
IP Villa Outdoor Station | SIP | Build Date: 05-23-2022
| ||
DHI-VTO2211G-WP | ![]() |
Wi-Fi Villa Outdoor Station | SIP | Build Date: 05-23-2022
|
Models | Image | Station Type | Description | Specification | Manual | Firmware |
---|---|---|---|---|---|---|
DHI-VTH5421HB-W | ![]() |
IP Color Indoor Monitor |
|
Build Date: 08-04-2023
| ||
DHI-VTH5422HW | ![]() |
2-wire IP Color Indoor Monitor |
|
Build Date: 08-04-2023
| ||
DHI-VTH2421FW-P | ![]() |
IP Color Indoor Monitor |
|
Models | Image | Type | Description | Specification | Manual |
---|---|---|---|---|---|
DHI-VTNS2003B-2 | ![]() |
Two-wire Power Supply Switch |
|
||
DEE1010B | ![]() |
Video Intercom Extension Module |
|
Dahua Housing | Dahua Model | Outdoor Station | Indoor Station | Short Description | Specifications | VTO Firmware | VTH Firmware |
---|---|---|---|---|---|---|---|
![]() |
DHI-KTP01(S) | DHI-VTO2202F-P | DHI-VTH2421FW-P |
DHI-VTO2202F-P - IP Outdoor Station |
Build Date: 05-23-2022
|
Build Date: 08-04-2023
|
Password Info
New Generation of video intercom does not have default password. User must create a password during the device initialization.
The first and second generation video intercom has these below default password:
- 002236
- 888888
- 123456
- User password initially is 123456.
- Unlock password initially is null.
- Arm password initially is 123456.
- Disarm password initially is 123456.
- Anti-hijack password initially is 654321.
NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.
NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.
NOTE3: Generation 2 and Generation 3 will work together as they both use SIP technology.
Instructions
VDP Config Instructions
- How To Discover A Device In VDPConfig
- How To Modify Network Settings In VDPConfig
- How To Modify System Settings In VDPConfig
- How To Upgrade Firmware In VDPConfig
- How To Adjust the time of a device in VDPConfig
Stand Alone VTO
VTH and VTO Setup
DSS Express Setup
Software and Mobile App
SIP 2.0 Devices
WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are compatible with SIP 2.0 before updating your devices
Models | Image | Station Type | Generation | Description | Specification | Manual | Main Firmware | MCU Firmware | Voice Firmware |
---|---|---|---|---|---|---|---|---|---|
VTO1210C-X-S | ![]() |
Apartment Outdoor Station | SIP |
|
|
|
Build Date: 07-08-2019
|
Build Date: 03-05-2019
|
Build Date: 04-20-2019
|
VTO2000A-S | ![]() |
Villa Outdoor Station | SIP |
|
|
|
Build Date: 07-08-2019
|
Build Date: 11-23-2018
|
Build Date: 04-20-2019
|
VTO2000A-2-S | ![]() |
2wire Villa Outdoor Station | SIP |
|
|
|
Build Date: 07-08-2019
|
Build Date: 11-23-2018
|
Build Date: 04-23-2019
|
VTO2111D-WP-S | ![]() |
Wireless Outdoor Station | SIP |
|
|
|
Build Date: 07-08-2019
|
Build Date: 04-23-2019
|
Build Date: 02-25-2019
|
Models | Image | Station Type | Description | Specification | Manual | Firmware | Firmware (Part 2) |
---|---|---|---|---|---|---|---|
VTH1550CH-S | ![]() |
IP Color Indoor Monitor |
|
Build Date: 05-09-2023
| |||
VTH1550CHW-2-S | ![]() |
2wire IP Indoor Monitor 7 inch |
|
Build Date: 03-21-2019
| |||
VTH5221D-S | ![]() |
Wireless indoor monitor 7-inch- Black |
|
Build Date: 08-04-2023
|
Build Date: 08-04-2023
| ||
DHI-VTH5221DW-S | ![]() |
Wireless indoor monitor 7-inch- Black |
|
Build Date: 08-04-2023
|
Build Date: 08-04-2023
|
VTNS1060A | ![]() |
Network Power Supply for IP System |
|
|
VTNC3000A | ![]() |
2-Wire Network Controller |
|
|
PFM321D-US | ![]() |
Power Supply |
|
|
PFM320D-US | ![]() |
Power Supply |
|
NOTE: You cannot mix and match Video Intercom devices from Generation 1 and 2, or Technology.
NOTE2: Generation 1 devices cannot be upgraded to Generation 2 firmware. Generation 2 devices cannot be downgraded to support Generation 1 devices.
Instructions
Stand Alone VTO
VTH and VTO Setup
- How To Add A VTH1550CH To a VTO1210C-X
- How To Add A Second VTH1550CH To A VTO1210C-X
- How To Add A Second VTH1660CH To a VTO1210C-X
- How To Add A VTO2111D-WP To a VTH5221D
- How To Add A Second VTH1550CH To a VTO2111D-WP
DSS Express Setup
GEN1 Devices
WARNING! Do Not Flash This Firmware Unless You Are 100% Sure All of Your Video Intercom Devices are Gen 1 before updating your devices
Models | Image | Station Type | Description | Manual | Firmware |
---|---|---|---|---|---|
VTO1210C-X | ![]() |
Apartment Outdoor Station |
|
Build Date: 06-14-2018
| |
VTO1210B-X | ![]() |
Apartment Outdoor Station |
|
Build Date: 06-14-2018
| |
VTO1220BW | ![]() |
Apartment Outdoor Station |
|
Build Date: 06-14-2018
| |
VTO2000A | ![]() |
Villa Outdoor Station |
|
Build Date: 06-13-2018
| |
VTO2000A-2 | ![]() |
2wire Villa Outdoor Station |
|
Build Date: 06-13-2018
| |
VTO2111D-WP | ![]() |
Wireless Outdoor Station |
|
Build Date: 07-31-2018
|
Models | Image | Station Type | Description | Manual | Firmware |
---|---|---|---|---|---|
VTH1550CH | ![]() |
Apartment Outdoor Station |
|
Build Date: 06-22-2018
| |
VTH1660CH | ![]() |
IP Indoor Monitor 10 inch |
|
Build Date: 06-22-2018
| |
VTH1550CHW-2 | ![]() |
2wire IP Indoor Monitor 7 inch |
|
Build Date: 06-22-2018
| |
VTH5221D | ![]() |
Wireless indoor monitor 7-inch- Black |
|
Build Date: 07-31-2018
| |
DHI-VTH5221DW | ![]() |
Wireless indoor monitor 7-inch- Black |
|
Build Date: 07-31-2018
|
VTNS1060A | ![]() |
Network Power Supply for IP System |
|
VTNC3000A | ![]() |
2-Wire Network Controller |
|
PFM321D-US | ![]() |
Power Supply |
|
PFM320D-US | ![]() |
Power Supply |
|
VTOB108 | ![]() |
Surface Mounted Box for VTO2000A |
|
VTOB107 | ![]() |
Flush Mounted Box for VTO2000A |
|
VTOB110 | ![]() |
Surface Mounted Box for VTO1210C-X |
|
VTOB103 | ![]() |
Flush Mounted Box for VTO1210C-X |
|
FAQ
Q: Which model of VTO (Outdoor Station) can work stand-alone and make a call notification to DMSS when call button is pressed?
A: DHI-VTO2202F-P, DHI-VTO2311R-WP, DHI-VTO2211G-WP, VTO2000A-S, VTO-2000A-2-S, VTO2111D-WP-S, VTO2000A, VTO2000A-2
Q: Can Apartment outdoor station (VTO1210C-X and VTO1210C-X-S and DHI-VTO4202F) work with DMSS App?
A: Yes, but it requires License for firmware customization. Please reach out to your local Sales Rep or Technical Consultant.
Q: How do I access device config page in VTH (indoor monitor) device?
A: From the homepage, press and hold Settings button for 6 seconds.
Q: What the difference between Transmission 1 and Transmission 2 on the network settings?
A: Mode 1: Multicast (multicast).
The default is mode 1. Using multicast in a multicast network environment, the effect is best at this time
Mode 2: Unicast (TCP),
If the router does not support multicast, the group call will have a black screen on VTH, then you can switch to unicast mode. In addition, if the network is particularly poor, you can also use this mode, because TCP has a retransmission mechanism to avoid frame loss.
SIP 2.0 Performance Chart
SIP2.0 Performance Chart | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
System Capacity\SIP Server | Community | Apartment | Small apartment |
Villa/Office | |||||||||||||
V8 | V7 | ||||||||||||||||
DSS7016-S2 | DSS4004-S2 | DSS Pro | DSS Express | DSS7016-S2 | DSS4004-S2 | DSS Pro | DSS Express | Apartment Door Station | Modular Door Station |
Villa Door Station |
Wi-Fi Villa Station |
1st 2-Wire Villa Station |
2nd 2-Wire Villa Station |
New 2-Wire Villa Station | |||
VTO Count | 2000 (5000 w/ Custom Firmware) |
1000 | 2000 | 256 | 200(Including VTS) |
64(Including VTS) | 64(Including VTS) | 32(Including VTS) | 200/300VTH+20VTO | 20 | 4 | (1)Use VTNC3000A Networking,VTO+VTH≤4
(2)No VTNC3000A Networking,VTO+VTH≤5 |
20 | Use VTNS2003B-2 Networking,VTO+VTH≤6 | |||
VTH Count | 2000 (5000 Distributed) | 1000 | 1000 | 256 | 10 | 3 | 10 | ||||||||||
VTH Master/Slave Capacity | 1Master,4Slave | 1Master,9Slave | 1Master,1Slave | (1)1Master2Slave,Use VTNC3000A Networking | 1Master,9Slave | 1Master,4Slave | |||||||||||
(2).1 Master and 3 Slave,No VTNC3000A Networking | |||||||||||||||||
Video Surveillance Count | 4 | 3-As SIP Server Door Station | 3 | 3 | 3 | 3 | |||||||||||
4 (VTH monitor VTO Simultaneously) | 4-Non-SIP Server Door Station(VTH monitor VTO Simultaneously) | 3 (VTH monitor VTO Simultaneously) | 3 (VTH monitor VTO Simultaneously) | 3 (VTH monitor VTO Simultaneously) | 3 (VTH monitor VTO Simultaneously) | ||||||||||||
House to House Call Capacity | Concurrent Calls to Center | 20 | To be added | 20 | To be added | 20 | To be added | 20 | To be added | - | |||||||
Concurrent Calls from VTH to VTH | 30 | 30 | 30 | 30 | 20 | 20 | 2 | 1 | 1 | 1 | 1 | ||||||
Concurrent Calls from VTO to VTH | 100 | 100 | 100 | 100 | - | ||||||||||||
DMSS | Register Count | DSS Agile Replace | up to 200 or 300 depends on different VTO deivce (need to buy license for each apartment) | 30 | |||||||||||||
Simultaneously | 8 | ||||||||||||||||
DSS Agile | Register Count | 5000 | 2000 | 5000 | 500 | 5000 | 2000 | 5000 | 500 | No Support for DSS Agile | |||||||
Online Simulta | 500 | 200 | 500 | 50 | 500 | 200 | 500 | 50 |