Scene Change

	Scene change function is used to detect abnormality of monitoring scene, such as camera being blocked, moved, or intense light change among other things. The intelligence library will make a comparison between the original picture and the picture of the camera which has been blocked or moved, and judge if there is similarity; it will trigger device alarm if there is no matched similarity.

	Scene Change
Set Up	Configure Alarm Trigger	Notifications
Set Up Scene Change on your device using various interfaces. > How To Set Up Intrusion Alarm	Configure responses when the Scene Change alarm is triggered, such as email notifications or alarm output. > Configure Alarm Response	Receive notifications using the mobile app > Set Up Notifications

Instructions

SystemUI Old

===Description===

This guide will show how to setup the Scene Change IVS feature at the SystemUI with OldGUI

Prerequisites

• Dahua device with Scene Change IVS feature

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Event

2. Under Video Detection

Click Scene Change

3. Use the dropdown box to select the channel

Check the box to enable the Scene Change feature

4. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)

5. Click Apply to save all settings

SystemUI New

===Description===

This guide will show how to setup the Scene Change IVS feature at the SystemUI with NewGUI

Prerequisites

• Dahua device with Scene Change IVS feature

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Event

2. Click Video Detection

3. Click Scene Change

4. Use the dropdown box to select the Channel

Click the Enable setting to enable the IVS feature

5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)

6. Click Apply to save all settings

WebUI Old

===Description===

This guide will show how to setup the Scene Change IVS feature at the WebUI with OldGUI

Prerequisites

• Dahua device with Scene Change IVS feature

Video Instructions

Step By Step Instructions

1. From the Main Page of the WebUI

Click Setting

2. Click Event

3. Click Video Detection

4. Click Scene Changing

5. Check the box to enable the IVS feature

6. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)

7. Click Save to save all settings

WebUI New

===Description===

This guide will show how to setup the Scene Change IVS feature at the WebUI with NewGUI

Prerequisites

• Dahua device with Scene Change IVS feature

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Alarm

2. Click Video Detection

3. Click Scene Change

4. Use the dropdown box to select the Channel

Click the Enable setting to enable the IVS feature

5. Configure the desired parameters for alarm triggers (actions when the IVS rule is triggered)

6. Click OK to save all settings

DSS Express

Description

Prerequisites

Video Instructions

===Step By Step Instructions===

DSS4004-S2 & DSS7016-S2

x