Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

IPCStorageRecordControl

Record Control

IPCRecordControl.jpg

Parameter

Function

Pack Duration

Here you can select file size within 1min~120min. Default setup is 8 minutes.

Pre-record

Please input pre-record value here.

For example, system can record the four seconds video in the buffer. The record begins from the fifth second.

Note:Configure pre-record time, when alarm or motion detection occurs, if there is no record, system will record the preceding n seconds record. 

Disk Full

There are two options: stop recording or overwrite the previous files when HDD is full.

  • Stop: Current working HDD is overwriting or current HDD is full, it will stop record.
  • Overwrite: Current working HDD is full; it will overwrite the previous file.

Record mode

There are three modes: Auto/manual/close.  

Record stream

There are two options: main stream and sub stream.


Retrieved from "https://DahuaWiki.com/index.php?title=IPCStorageRecordControl&oldid=15152"