Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

PTZ/Instructions/Pan

Pan

Description

The Pan feature allows the PTZ to move between two pre-established points.

NOTE

Please Note: PTZ Pan is currently not available on the following interface:

  • Mobile: iDMSS/gDMSS

Instructions

Icon for type SystemUI Old.pngSystemUI Old

How to Setup Pan via Old SystemUI

Prerequisites

  • Dahua recorder
  • VGA or HDMI monitor

Video Instructions

Step by Step Instructions

1. Click on PTZ to bring out PTZ menu.
1. Select PTZ Button.PNG

2. Click on the right arrow to expand the function list.
2. Click Right Arrow.PNG

3. Click "AutoPan" to start the horizontal pan function, and press the same button again to stop.

3. Click AutoPan.PNG

Icon for type SystemUI New.pngSystemUI New

How to Setup Pan via New SystemUI

Prerequisites

  • Dahua recorder
  • VGA or HDMI monitor

Video Instructions

Step by Step Instructions

1. Click on PTZ to bring out PTZ menu.
1. Select PTZ.PNG

2. Click on the right arrow to expand the function list.
2. Click Right Arrow - New SystemUI.PNG

3. Click "AutoPan" to start the horizontal pan function, and press the same button again to stop.

3. Click AutoPan - New SystemUI.PNG

Icon for type WebUI Old.pngWebUI Old

How to Setup Pan

Prerequisites

  • Dahua Network PTZ
  • IP Address of Network PTZ
  • Internet Explorer

Video Instructions

Step by Step Instructions

1. Login to your IP Camera via Internet Explorer.

PTZScan1.png

2. On the right hand side click, "PTZ Settings" and make sure, "Pan" is selected in the drop down menu.

PTZPan1.png

3. Click, "Start"

PTZPan2.png

PTZPanGIF.gif

Icon for type WebUI New.pngWebUI New

How to Setup Pan via New WebUI

Prerequisites

  • Internet Explorer

Video Instructions

Step by Step Instructions

1. Select "Live View".
1. Select Live View - New WebUI.PNG

2. Expand the function list and choose "Pan".
2. Select Pan - New WebUI.PNG

3. Press "Start" to start the pan action and press "Stop" to stop the pan action.

3. Start Pan - New WebUI.PNG

Icon for type SmartPSS.pngSmartPSS

How to Setup Pan via SmartPSS

Prerequisites

  • Dahua Network PTZ

video Instructions

Step by Step Instructions

1. After opening SmartPSS, select "Live View".
1. Select Live View.PNG

2. Locate the camera from the list, drag and drop it into one of the camera grids.
2. Drag and Drop Camera Into a Grid.PNG

3. Expand the list "More Functions" and select "Pan".
3. Select Pan.png

4. Press the "Start" button to start the pan and press it again to stop.

4. Press Start Button.PNG

Icon for type DSS Express S.pngDSS Express

How to Setup Pan via DSS Express S

Prerequisites

  • DSS Express S installed on the computer

Video Instructions

Step by Step Instructions

1. Open "Live View", drag/drop the camera to the grid, and click on the up arrow towards the bottom to bring up the PTZ menu.
1. Live View - DSS Express S.PNG

2. Expand the function list by clicking on the 3 dots icon.
2. 3 Dots - DSS Express S.PNG

3. Click "Start rotate" to initiate the pan action, press again to stop the pan action.

3. Click Start Rotate - DSS Express S.PNG
Retrieved from "https://DahuaWiki.com/index.php?title=PTZ/Instructions/Pan&oldid=72606"