Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

PTZ/SmartPSS 2.0/Scan

How to Setup Scan in SmartPSS 2.0


The Scan feature allows you to set a predetermined path from Point A to Point B


  • Dahua Network PTZ
  • IP Address of Network PTZ
  • SmartPSS 2.0
  • PTZ added to SmartPSS Device List

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

PTZ Scan SmartPSS2.0 0.png

2. Click, "Liveview"

PTZ Scan SmartPSS2.0 1.png

3. Double click the PTZ on the device list on the left, and double click the video feed to bring the PTZ up full screen.

PTZ Scan SmartPSS2.0 2.png

4. Click, "PTZ"

PTZ Scan SmartPSS2.0 3.png

5. Click, "More Functions" in the lower left.

PTZ Scan SmartPSS2.0 4.png

5. Click the drop down list, and select, "Scan"

PTZ Scan SmartPSS2.0 5.png

6. Use the left and right arrows to define the left and right limitations for Scan.

PTZ Scan SmartPSS2.06.png

7. Click the power icon to start the Scan.

PTZ Scan SmartPSS2.0 7.png