Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Software/Dahua Toolbox/VDPConfig/Modify IP
Contents
How To Modify IP In VDPConfig
Description
This guide will show you how to modify the IP and network information of a device over a local network using VDPConfig for configuration and management.
Prerequisites
- Windows PC.
- Dahua video intercom device on the same LAN as the PC
- Dahua Toolbox
- VDP Config
Step by Step Instructions
1. Open DahuaToolbox and click Open next to VDPConfig
2. Discover the device in VDPConfig - How To Discover A Device Using VDPConfig
3. Check the box next to the device in the list
To open network settings:
Click the Pencil icon under the Operate
OR
Click Modify IP towards the bottom of the window
4. The Modify IP Address window will appear
5. Enter all network information then click OK
6. A green check mark will appear next to the device in the list when successful:
