Software/Dahua Toolbox/VDPConfig/Modify Network Settings

How To Modify Network Settings In VDPConfig


This guide will show you how to modify the network settings of a device over a local network using VDPConfig for configuration and management.


Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig

Upgrade Firmware - VDPConfig - 1.jpg

2. Discover the device in VDPConfig - How To Discover A Device Using VDPConfig

Modify IP - VDPConfig - 1.jpg

3. Check the box next to the device in the list

To open network settings:

Click the Pencil icon under the Operate


Click Modify IP towards the bottom of the window

Modify IP - VDPConfig - 2.jpg

4. The Modify IP Address window will appear

Modify IP - VDPConfig - 3.jpg

5. Enter all network information then click OK

Modify IP - VDPConfig - 4.jpg

6. A green check mark will appear next to the device in the list when successful:

Modify IP - VDPConfig - 5.jpg