Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:Alarm Record MobileUI DMSS
Contents
How To Setup Alarm Record
Prerequisites
- Dahua device that supports Alarm Input recording
- Physical alarm devices wired into Dahua devices - How To Connect A Physical Alarm To A Dahua Device
- iDMSS / gDMSS app
- Device added to iDMSS / gDMSS app
Video Instructions
Step by Step Instructions
1. Press Device
2. Select the device in the list
3. Select Remote Configuration
4. Select Alarm Setting
5. Select Local Alarm
6. Select the Alarm Input to configure
7. Toggle to enable the Local Alarm
Toggle the switch next to Advanced Configuration
8. Select Arm/Disarm Period to set the schedule for the alarm input
9. Tap the pencil icon to edit the schedule
10. Use the interface to create
Tap the save icon to save
Tap the arrow to return to the device configuration
11. Select Sensor Type
Select which Alarm Input type is being used: Normally Open (NO) or Normally Closed (NC)
12. Toggle the switch next to Record to enable
Tap Select Channel
Select which channel(s) to record when the alarm input is triggered
Tap the save icon to save
13. Tap the save icon at Local Alarm to save all settings
14. A prompt will appear to confirm
