Template:Kiosk WebUI Alarm Linkage
Alarm Linkage
| Name | Description |
|---|---|
| Alarm Input | You cannot modify the value. Keep it default. |
| Name | Enter a zone name. |
| Alarm Input Type |
There are two options: NO and NC. If alarm input type of the alarm device you purchased is NO, then you should select NO; otherwise you should select NC. |
| Fire Link Enable |
If fire link is enabled the access controller will output alarms when fire
alarms are triggered. The alarm details will be displayed in the alarm
log. |
| Alarm Output Enable |
The relay can output alarm information (will be sent to the management platform) if the Alarm Output is enabled. |
| Duration (Sec.) | The alarm duration, and the range is 1–300 seconds. |
| Alarm Output Channel |
You can select an alarm output channel according to the alarming device that you have installed. Each alarm device can be regarded as a channel. |
| Access Link Enable |
After the Access Link is enabled, the access controller will be normally on or normally closed when there are input alarm signals. |
| Channel Type | There are two options: NO and NC. |
Alarm Linkage
Alarm Log
