Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Template:LincX2PRO Flood Light Setup MobileUI DMSS
Step by Step
This guide will assume that the device has been added to the DMSS app already. If you require assistance with the app set up and initialization process of the L26 please see [enter link here] for more info.
1. From the Home section of the DMSS app, select Device to open the Device Manager, from here select the L26.
2. From the Device Configuration menu select FloodLight.
3. Under this section there will be three settings that can be configured:
Mode: Manual/Motion Activation/Dusk to Dawn
PIR Region: Setting the range of the motion sensor
Light on Time: The time frame the lights will be active after motion is triggered.
4. To finalize the setup, set the PIR range and the duration of the light when motion is detected.
