Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Template:LincX2PRO Motion Detection Setup MobileUI DMSS


Video Instructions

1. Select your LincX2PRO unit under the "Device" tab

LincX2PRO MD Setup-1.png

2. Tap on Motion Detection Setting

LincX2PRO MD Setup-2.png

3. Assure that the switch is enabled and select the Detection Sensitivity to configure the sensitivity

LincX2PRO MD Setup-3.png

4. Save the desired settings and go back

LincX2PRO MD Setup-4.png

5. Go back

LincX2PRO MD Setup-5.png

6. Tap on Message

LincX2PRO MD Setup-6.png

7. Select the Cloud icon to view the devices linked to your DMSS account and tap on the bell icon

LincX2PRO MD Setup-7.png

8. Tap on your LincX2PRO device

LincX2PRO MD Setup-8.png

9. Ensure that the switch is enabled and click on the Floppy Disk icon to save, go back

LincX2PRO MD Setup-9.png

10. Go back again

LincX2PRO MD Setup-10.png

11. Go to "Me"

LincX2PRO MD Setup-11.png

12. Make sure that the Notification Switch is enabled and now you should receive Motion Detection notifications

LincX2PRO MD Setup-12.png

Retrieved from "https://DahuaWiki.com/index.php?title=Template:LincX2PRO_Motion_Detection_Setup_MobileUI_DMSS&oldid=70669"