Thermal/Temperature Monitoring/Setup
Contents
Temperature Monitoring Solution Setup
Description
This guide will cover the complete setup for the Thermal Temperature Monitoring Solution including physical setup of the devices and the configuration of the the camera and NVR
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- DHI-NVR5216-16P-I 16 Channel NVR with Face Detection
- JQ-D70Z Blackbody
Diagrams
Instructions
- Physical Setup
- Camera Setup - Initial Setup and Blackbody Configuration
- NVR Setup NVR Setup
| Physical Setup | ||||
|---|---|---|---|---|
| Camera Plugged Into NVR | NVR Setup | Camera Setup | ||
| Camera Stand Alone | NVR Setup | Camera Setup | ||
| Configuration |
Instructions
Physical Setup
Video Instructions
Step by Step Instructions
Mounting Adapter Plates
The mounting brackets/plates must be installed to both the camera and black body device
RQW026-00 Brackets
Black body bracket installation
Thermal camera bracket installation
To attach the tripod:
Use the center hole to screw into tripod
Tripod installed
Suggested Physical Layout
Side view diagram
Top view diagram
Camera height: 2m (6.56 ft)
Black body height: 1.8m (5.9 ft)
Minimum distance between both: 3m (9 ft)
Side view diagram
Top view diagram
JQ-D70Z Black body Setup
Plug in the power and turn on
Allow the device to warm up to 35.0 C
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser (default 192.168.1.108)
At the Web Login
Enter the Username and Password
Click Login
2. Select Setting
3. Select Smart Thermal
4. Select Smart Plan
5. Select the Temperature icon then click Save
6. Select Human Temperature
7. Select Blackbody parameter
8. Select the Draw Rule button
9. Draw a box inside the highlighted blackbody box
10. Check the box to Enable
Click Save
11. Select Human Temperature Measurement
12. Check the box to Enable
13. Click Draw Rule
Then draw the desired rule
14. Click Save
15. Select Temperature
16. Select Global Setup
17. Select Temperature Switch
Use the dropdown box to change the unit to F (Fahrenheit)
18. Click Save
Video Instructions
Step by Step Instructions
1. From Live View
Right click and select Main Menu
2. Select AI
3. Select Parameters > Face Detection
4. Use the drop down box
To select the Channel/camera
5. Toggle Enable
6. Click Apply
