PFM900 How To Scan Network

From Dahua Wiki

Jump to: navigation, search

How to Scan Network with PFM900

Prerequisites

  • PFM900
  • Ethernet cable connected to network

Scanning Network with PFM900 Instructions

1. Power on your PFM900 Device, if it does not power on check How to Charge the PFM900


20160225 1042161234.jpg


2. Connect the Ethernet cable to the PFM900 and select "Network tools" with the arrow buttons, enter the menu with the right arrow button


20160302 132026.jpg


3. Now press the "SET" button to setup your connection to the network


20160302 132038.jpg


4. For easy setup let the device Use DHCP, otherwise select static IP and configure your PFM's IP Adress, Mask, gateway, DNS settings, and then press the "+ IRIS" button to confirm settings or the "SET" button to exit out.


20160302 132104.jpg


5. Now press the "+ FOCUS" button to perform a network Sniff test, this test will locate all public IP addresses on your immediate network via your devices settings.


20160302 132139.jpg


6. The PFM900 will even detect multiple IP addresses on your network! Press the "+ FOCUS" button when finished.


20160302 132240.jpg


7. To list the subnet IP's and the latency (ping in milliseconds) to them press "- FOCUS" and the PFM900 will do an active search on your network. once finished press "- FOCUS" again.


20160302 132627.jpg


8. To ping an external website such as "www.google.com" from the PFM900 on your network please open your keyboard and type out the url


20160302 132719.jpg


9. After typing in the URL close the keyboard and press the "+ ZOOM" key to ping the website. This screen should show you how long it takes for the device to connect to the specified website.


20160302 132739.jpg